Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Adaptor for Parker Hale English Rods (over 7mm)3 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)2 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)3 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)2 x VFG Adaptor from M5 to 1/8" Aluminium2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x K-80 Standard Trigger - Steel2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Complete Set for .1771 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]2 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]2 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Adaptor for VFG Rods Brass1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Gerber Basic Fixed Blade Serrated1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x VFG Quick Clean Felts for .22 (Box of 80)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Schmierfix Grease by Liqui Moly1 x Gerber Myth Series Fixed Saw1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Gerber Powerframe Knife1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Picatinny Rail Browning BAR, Alu [..0003]1 x Recknagel Picatinny Rail Browning BAR, Steel [..0003]1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Recknagel Picatinny Rail Anschutz 1780, Alu [..002B]1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Picatinny Rail Browning Maral, Steel [..002J]1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Weaver Bases - Sauer 100/101 New [..-302Y]1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Recknagel Stock Shield - Oval Contoured1 x Gerber GDC Zip Blade1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Recknagel Picatinny Rail Steyr-Mannlicher L 20 MOA, Alu [..2188]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Picatinny Rail CZ 550 Standard, Alu [..0062]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Gerber Metolius Pocket Folder1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Grip Cap Skeleton Rounded [24060-0100]1 x Recknagel Picatinny Rail Winchester XPR Short, Alu [002V]1 x Anschütz Biathlon Harness1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x ERATAC ACI Bubble Level [T0940-0000]1 x Contessa Spare Ring-to-Base Screws1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)
Manufacturers
Useful Information