Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x Jones Original Pad Adjuster1 x Jones Thru-the-Pad Adjuster1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Jones Gun Nut Kit1 x Schultz & Larsen Take Down Rifle Case1 x Schultz & Larsen Professional Bipod by Spartan2 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schultz & Larsen T-Handle Wrench (Torx 20)2 x Schultz & Larsen Torx Key for Scope Mounts1 x Schultz & Larsen Red Recoil Pad1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x Schmierfix Grease by Liqui Moly1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)2 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Schultz & Larsen Spare Screws for Picatinny Rails2 x Recknagel Picatinny Bases - Schultz & Larsen1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel Zeiss Rail 45º Components - 6mm BH2 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]2 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]2 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]2 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Weaver Bases - Browning Acera [..-3077]2 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]2 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Blank 12mm Eurorail - 150mm2 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)2 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]2 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel Grip Cap Domed with Edge [24000-0200]1 x Recknagel Stock Shield - 2 Point Shield Flat1 x Recknagel Picatinny Tri-Nut Rings 30mm [57030-0500]1 x Recknagel Grip Cap Compartment1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Adaptor for Thermal and Night Vision Devices - 56mm1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Grip Cap Domed Blank [24000-0400]2 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Recknagel Grip Cap Skeleton Rounded [24060-0100]1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel Picatinny Rail Benelli ARGO, Alu [..0076]1 x Recknagel Picatinny Rail Browning Maral, Steel [..002J]1 x Recknagel Picatinny Rail Browning BAR, Steel [..0003]1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]2 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver/Picatinny Mounts for S&B Rail (QD Lever)1 x Recknagel 40mm Ring Components - 5mm BH1 x Recknagel Picatinny Rail Browning A Bolt 3 Long, Alu [..012T]1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Recknagel 25.4mm/1 inch Ring Components - 5mm BH1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x Recknagel SOB02 Silencer (Standard Thread)1 x Recknagel Extended Rail Remington 700 Short [57250-0012]1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]2 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Recknagel Picatinny Rail Browning BAR, Alu [..0003]1 x VFG Adaptor for VFG Rods Brass1 x Recknagel Picatinny Rail Browning Maral, Alu [..002J]1 x Recknagel 30mm Ring Components - 5mm BH1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Recknagel Picatinny Rail Browning X Bolt Long, Alu [..011P]1 x Recknagel Picatinny Rail Browning A Bolt 3 Short, Alu [..002T]1 x Recknagel SOB01 Silencer (Standard Thread)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel 34mm Ring Components - 5mm BH1 x ERATAC Picatinny Extended Riser Mount (Nut)
Manufacturers
Useful Information