Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Black Barrel Case (83cm Internal)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Anschütz Biathlon Harness1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)2 x Contessa Shotgun Rib Mount for Red Dot Sights (Leica/Docter/Burris)1 x Black Leather Shell/Cartridge Pouch1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Badge - Cob Bronze1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]2 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Recknagel Picatinny Rail Heym SR21, Alu [..0022]1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Jones Original Pad Adjuster1 x EX Demo - Gerber Metolius Pocket Folder1 x Jones Gun Nut Kit2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Krieghoff 2011 Badge (Collectors Badge)1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Recknagel Picatinny Rail Savage Short 0 MOA, Alu [..0093]1 x Gerber Gator Combo Replacement Saw1 x Bauer Outdoor 10x25 Binoculars1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Bauer HD 8x42 Binoculars1 x Gerber Myth Series Fixed Saw1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Gerber Balance Multi-Tool Black1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Recknagel Blank 12mm Eurorail - 150mm1 x Bauer ED 8x42 Binoculars1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Gerber GDC Zip Blade1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Schultz & Larsen Red Recoil Pad1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Silva Map Measurer (Mechanical)1 x VFG Quick Clean Felts for .177 (Box of 100)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Raised [..-1020]1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Krieghoff 2009 Badge (Collectors Badge)1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Recknagel Picatinny Rail Steyr-Mannlicher S, 0 MOA, Alu [..0388]1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Krieghoff Achievement Badge 25 Straight1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x Krieghoff Achievement Badge 100/3001 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Walkstool Steady1 x Gerber Paraframe II Fine Edge Knife1 x Recknagel Picatinny Rail Steyr-Mannlicher M, 0 MOA, Alu [..0288]1 x Gerber Basic Fixed Blade Serrated
Manufacturers
Useful Information