Schultz & Larsen Scope Rings 25.4mm, Med (11mm BH)

£170.00
20% VAT incl.

Available Options

  • Model:SL6014
Schultz & Larsen Scope Rings
25.4mm / 1 inch - Medium (11mm Base Height)


Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 102g
Ring Diameter - 25.4mm / 1 Inch
Base Height (BH) - 11mm
Code Ref: SL6014

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Walkstool Steady1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Steel1 x Bauer Outdoor 10x25 Binoculars1 x Black Barrel Case (83cm Internal)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff Navy Gun Slip1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Krieghoff Sight Bead Blanking Screw1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Krieghoff Woven Fabric Patch1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Gerber Metolius Pocket Folder1 x Krieghoff 12b Choke Wrench1 x Krieghoff Spares Kit1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Gerber GDC Zip Blade1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Jones Gun Nut Kit1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Schmierfix Grease by Liqui Moly1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Krieghoff Ejector Ball and Spring1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)
Manufacturers
Useful Information