Krieghoff Waterproof Shooting Jacket

£360.00
20% VAT incl.

Available Options

  • Model:KWJ-RH


The New Krieghoff Waterproof Shooting Jacket
Right-Hand or Left-Hand


A jacket designed and produced for clay shooters. The Krieghoff Waterproof Shooting Jacket combines comfort with practicality for any shooter in wet and wild conditions. The jacket itself is fully waterproof and will keep you warm and dry in the toughest conditions. Durable waterproof fabric beads rain away and the non-slip "Faux Suede" shoulder patch provides the perfect mounting surface. Large easy access shell pockets with drainage holes make the jacket fully accessible. There is no other Shooting Jacket like it.

- Fully Waterproof
- Machine Washable
- Large Cartridge Pockets
- Outside Top Pocket
- Double Zip & Press Stud Fastening
- Zipped Quick Access Pocket in Flap
- Inside Zipped Pocket
- Fleece Lining with Quilted Sleeves
- Velcro Adjustable Storm Cuffs
- Polyester "Faux Suede" Shooting patch, with "stay flat" stitching
- Shooter's Collar, keeps the back of your neck dry but does not interfere with the gun mount.
- Longer back panel and draw cord
- Right or Left Hand Options
- Made Exclusively for Krieghoff in the UK

Fully Waterproof
Outer fabric is a hard wearing polyester weave with a laminated BPU (breathable polyurethane coating), the fabric is fully waterproof and is tested to 8000mm hydrostatic head, the breathability is rated very good with a Ret 6 rating. Seams and embroidery on the garment are tape sealed on the inside to maintain the garments waterproof ability.

Waterproofing
The garments first barrier against water penetration is the DWR (durable water repellent) coating on the outside of the fabric, allowing water to bead up and roll off rather than soaking into the garment "wetting out". Proper care and treatment can help restore the DWR coating and its properties to increase the garments performance which will extend its life.

Krieghoff Waterproof Jacket Information Download >>>

Warning
Any additional embroidery will penetrate the waterproof membrane and destroy the jacket's waterproof ability.


Colours: Navy and Royal Waterproof Fabric with Blue Faux Suede Detail. White Embroidery. Black Fleece and Black Quilted Lining.

Sizes Available (Chest Sizes):
Small - 34-36" (86-91cm) Right-Hand Only
Medium - 38-40" (96-101m) Right-Hand & Left-Hand
Large - 42-44" (106-111cm) Right-Hand & Left-Hand
X-Large - 46-48" (116-121cm) Right-Hand & Left-Hand
XX-Large - 50-52" (126-131cm) Right-Hand & Left-Hand
3X-Large - 54-56" (133-138cm) Right-Hand Only

More Sizes will be available



You might also like...

2 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)2 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)2 x Contessa QD Mount for ATN 4K Night Vision (Blaser)2 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x VFG Pull Through Pocket Set for .22 Upwards2 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]4 x Jones Original Pad Adjuster2 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)2 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Bauer Outdoor 10x25 Binoculars1 x Schultz & Larsen Take Down Rifle Case2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser2 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Bauer HD Series 8x25 Binoculars3 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser2 x Jones Thru-the-Pad Adjuster2 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff1 x Schmierfix Grease by Liqui Moly1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Walkstool Steady1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x WalkStool Spare Leg Joints1 x Contessa Browning BAR Euro Rail for Quick Release Mount2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Krieghoff Brass Front Sight Bead1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Spare Blaser Mounting Clamp Parts1 x Recknagel Picatinny Rail Browning X Bolt Short, 20 MOA, Alu1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Gerber Metolius Pocket Folder1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]2 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Winchester 3" Folding Knife1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)2 x Teague Precision Choke Key1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Bauer ED 10x42 Binoculars1 x Krieghoff Woven Fabric Patch1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA) Extended1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Contessa Picatinny Rail - Sauer 200 Long (20 MOA)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Bauer ED 8x50 Binoculars1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa Picatinny Rail - Sauer 202 (10 MOA)1 x Krieghoff Ejector Ball and Spring1 x Contessa Picatinny Rail - Savage Axis/Edge, Short (0 MOA)1 x Contessa Picatinny Rail - Savage Axis/Edge, Short (10 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Picatinny Rail Remington 700 S, Steel [..0012]3 x Krieghoff Stock Removal Wrench1 x Contessa Picatinny Rail - Winchester XPR Short (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA) Extended1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Browning A Bolt 3 Short (0 MOA) Extended1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Gerber GDC Zip Blade1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x ERATAC 36mm Ring with UNI-Interface [03680-5736]
Manufacturers
Useful Information