Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Contessa Tikka T1 Euro Rail for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Anschütz Biathlon Harness2 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]3 x Gerber Paraframe II Fine Edge Knife1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]4 x Jones Gun Nut Kit1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope3 x Gerber Metolius Pocket Folder2 x Black Leather Shell/Cartridge Pouch1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]2 x Ex-Demo K-80 Steel 12b Hanger #52 x Clearance Krieghoff Classic Rifle Americase (With Cover)2 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)2 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]2 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)3 x Gerber Basic Fixed Blade Serrated1 x Recknagel SOB3D Silencer (ERA LOC)2 x WalkStool Set of Spare Red Spring1 x Walkstool Steady1 x Recknagel Picatinny Rail CZ 550 Standard, Alu [..0062]2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts2 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Gerber Myth Series Fixed Saw1 x Badge - Cob Bronze1 x Silva ex10 Distance Pedometer - White3 x Gerber GDC Zip Blade3 x ERATAC ACI Bubble Level [T0940-0000]2 x Starkie Blue (A.K.A Smurf Poo)1 x Winchester 3" Folding Knife3 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x WalkStool Spare Leg Joints1 x Ex-Display Gerber GDC Zip Hex1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Custom Rifles of Great Britain by Bruce Potts1 x Parker Hale Thread to 8-32 Thread Converter2 x VFG Adaptor for VFG Rods (Spare)2 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]2 x Gerber Dime Multi-Tool (Lime)1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Bauer HD 8x42 Binoculars1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)2 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Gerber Powerframe Knife2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Contessa Quick Release Mount for Zeiss Rail1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Ex-Demo K-80 Steel 12b Hanger #61 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x AimZonic Plus Camo Sound Moderator1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff "K" Collectors Badge1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Tactical Ring Inlays 30mm to 1" [T0991-0000]1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x VFG Adaptor for VFG Rods Brass1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 56mm1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x Black Barrel Case (83cm Internal)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Adaptor for Thermal and Night Vision Devices - 48mm1 x Recknagel Stock Shield - 2 Point Shield Contoured1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Bauer ED 10x42 Binoculars1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Recknagel Grip Cap Flat with Small Edge [24020-0400]1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x DMT Non-Skid Mat (10"x4")1 x Holex TORX Screwdriver set of 7 [00062-5057]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Ebony & Brass 20 Bore Snap Caps1 x Contessa Picatinny Rail - Sako 75/85 X-Short (0 MOA)1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23100-5010]1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Recknagel QD Sling Swivel Socket - Screw-on [23225-0000]1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)
Manufacturers
Useful Information