K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Krieghoff Navy Gun Slip2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Brass Front Sight Bead3 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Woven Fabric Patch2 x Anschütz Biathlon Harness1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor2 x Krieghoff "K" Denim Cap - Grey1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable1 x Recknagel Picatinny Rail Savage Long 20 MOA, Alu [..2193]1 x Krieghoff Trigger Screw2 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Recknagel Grip Cap Compartment1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Recknagel Steel Stock Trap Door1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x K-80 Standard Trigger - Black Titanium1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Krieghoff Front Sight Bead (Small)1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Krieghoff Sight Bead Blanking Screw1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Krieghoff Front Sight Bead (Standard)1 x Recknagel Front Sight Bead White [11442-0300]1 x Recknagel Front Sight Bead Red [11444-0300]1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff Brass Mid Sight Bead1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x K-80 Forward Position Trigger - Black Titanium1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x K-80 Forward Position Trigger - Gold Plated1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Krieghoff Comb Wrench (T-Handle)1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x K-80 Stock Weight for Balance System1 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff Stock Removal Wrench1 x Schultz & Larsen Venom Moderator (Over Barrel)2 x Jones Thru-the-Pad Adjuster1 x K-80 Barrel Weight Balance System2 x Jones Gun Nut Kit1 x Jones Original Pad Adjuster1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Krieghoff "K" Denim Cap - Navy1 x LED Lenser Intelligent Filter Set with Holster1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Silva Dine Duo Kit - Purple/White1 x Schmierfix Grease by Liqui Moly1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Bauer Outdoor 8x21 Binoculars1 x Contessa Quick Release Mount for Swarovski Rail1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Silva Map Measurer (Mechanical)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Bear Grylls Pocket Tool1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Gerber New Myth Series Pocket Folder1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Black Barrel Case (83cm Internal)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Krieghoff Extended Pillars for Adjustable Comb1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x K-80 Forward Position Trigger - Gold Titanium
Manufacturers
Useful Information