K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Krieghoff "K" Denim Cap - Grey2 x Krieghoff Woven Fabric Patch1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)3 x Krieghoff HIVIZ Pro Sights2 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff "K" Mesh Cap - Black1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Recknagel Picatinny Rail Sauer 202 Std, Steel [..0080]1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Trigger Screw1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box2 x Krieghoff Spares Kit1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor fits Pro Shot Cleaning Rods (8-32 Thread)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x EX Demo - Gerber Metolius Pocket Folder1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Adaptor for VFG Rods (Spare)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Anschütz Biathlon Harness1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA) - Extended1 x Contessa Picatinny Rail - Remington 700 Short (30 MOA)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Krieghoff Navy Gun Slip1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Krieghoff Ejector Ball and Spring1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff "K" Logo Cap Navy & White1 x Jones Original Pad Adjuster1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Walkstool Steady1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x AimZonic Compact Camo Sound Moderator2 x Black Barrel Case (83cm Internal)1 x Jones Gun Nut Kit1 x Krieghoff Shell Bag1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Bauer HD Series 8x25 Binoculars1 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Recknagel SOB3D Silencer (ERA LOC)
Manufacturers
Useful Information