K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff Spares Kit2 x Krieghoff Pro Choke Box2 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)4 x Bauer - One Piece Railmount 25.4mm (11mm High)3 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Schultz & Larsen Professional Bipod by Spartan2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff HIVIZ Pro Sights3 x Krieghoff Brass Front Sight Bead2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x Bauer HD Series 8x25 Binoculars2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Bauer ED 10x42 Binoculars1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Anschütz Biathlon Harness3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)3 x Jones Gun Nut Kit3 x Jones Thru-the-Pad Adjuster1 x Schultz & Larsen Take Down Rifle Case3 x Teague Precision Choke Key3 x Jones Original Pad Adjuster3 x Ebony & Brass 20 Bore Snap Caps2 x Custom Rifles of Great Britain by Bruce Potts2 x Starkie Blue (A.K.A Smurf Poo)2 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]4 x Black Barrel Case (83cm Internal)4 x Schmierfix Grease by Liqui Moly2 x Black Leather Shell/Cartridge Pouch3 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]2 x AimZonic Plus Camo Sound Moderator2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail2 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]2 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Walkstool Steady1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]3 x Krieghoff Sight Bead Blanking Screw1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Front Sight Bead Red [11444-0300]1 x WalkStool Comfort 65 (65cm/26in)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings4 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Briley 20b Speed Wrench - For Krieghoff3 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Krieghoff Brass Mid Sight Bead2 x MSA Sordin - Hygiene Kit - Foam Seals1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Front Sight Bead White [11442-0300]1 x WalkStool Spare Leg Joints1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes3 x AimZonic Compact Camo Sound Moderator1 x Recknagel Leaf Sight 19mm [15235-3019]1 x K-80 Barrel Weight Balance System2 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x K-80 Stock Weight for Balance System1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Recknagel Grip Cap Compartment1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Krieghoff "K" Denim Cap - Grey1 x VFG Magnetic Felt Clamps for Vices - 150mm2 x Krieghoff Woven Fabric Patch1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Krieghoff 28b Choke Wrench1 x VFG Magnetic Felt Clamps for Vices - 100mm2 x Krieghoff K-80 Sport Logo Cap Navy & Red2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff 12b Choke Wrench1 x Krieghoff Trigger Screw1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Krieghoff Stock Removal Wrench1 x Krieghoff Choke Multi Wrench1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]2 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Krieghoff Comb Wrench (T-Handle)1 x K-80 Standard Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Forward Position Trigger - Steel1 x Gerber Gator Combo Replacement Saw1 x Krieghoff K-Diamond Beanie - Navy1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff "K" Logo Cap Navy & White2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)1 x Ex-Demo K-80 Steel 12b Hanger #61 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Bear Grylls Basic Survival Kit by Gerber1 x Bear Grylls Compact Multi-Tool by Gerber1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel Tactical Ring Inlays 30mm to 1" [T0991-0000]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Recknagel Grip Cap Skeleton Rounded [24060-0100]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Recknagel Super Express 1 Leaf Sight [15400-3025]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)
Manufacturers
Useful Information