K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Krieghoff Pro Choke Box1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff Woven Fabric Patch2 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Trigger Screw1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Schultz & Larsen Professional Bipod by Spartan3 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Krieghoff Brass Front Sight Bead2 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff Navy Gun Slip1 x VFG Barrel Cleaning Felts for .45 (Box of 30)2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Winchester 3" Folding Knife1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Krieghoff Brass Mid Sight Bead1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x ERATAC Bubble Level [T0940-0002]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Jones Thru-the-Pad Adjuster1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Jones Gun Nut Kit2 x Recknagel SOB3D Silencer (Standard Thread)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Briley 20b Speed Wrench - For Krieghoff1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Gerber Gator Combo Replacement Saw1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Krieghoff Extended Pillars for Adjustable Comb2 x AimZonic Compact Camo Sound Moderator2 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Bauer HD 8.5x50 Binoculars1 x Bauer HD 8x42 Binoculars1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Bear Grylls Scout Essentials Kit1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Badge - Cob Bronze1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (05)1 x EX Demo - Gerber Metolius Pocket Folder1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x Krieghoff Comb Wrench (T-Handle)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Gerber Metolius Pocket Folder1 x Gerber Paraframe II Fine Edge Knife1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Jones Original Pad Adjuster1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)
Manufacturers
Useful Information