Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x ERATAC Bubble Level [T0940-0002]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Teague Precision Choke Key2 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Schultz & Larsen Torx Key for Scope Mounts1 x AimZonic Plus Camo Sound Moderator2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x AimZonic Compact Camo Sound Moderator2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Krieghoff HIVIZ Pro Sights1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x WalkStool Comfort 65 (65cm/26in)2 x Krieghoff Brass Front Sight Bead1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Walkstool Steady2 x Black Barrel Case (83cm Internal)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Schultz & Larsen Take Down Rifle Case2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x WalkStool Set of Spare Red Spring1 x WalkStool Spare Leg Joints3 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Krieghoff Trigger & Selector Locking Wrench1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]2 x Krieghoff Trigger Screw1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 10x25 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer Outdoor 8x21 Binoculars1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Anschütz Biathlon Harness1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Schultz & Larsen Picatinny Rail for Ambassador (20 MOA)1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Alu1 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Steel1 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)1 x Schultz & Larsen Weaver Rings 30mm, 7mm BH, Steel1 x Schultz & Larsen Picatinny Rail for Ambassador (0 MOA)1 x Schultz & Larsen Picatinny Rail for Legacy (20 MOA)1 x Recknagel Weaver Bases - Schultz & Larsen [57080-3093]1 x Schultz & Larsen Picatinny Rail for Browning X-Bolt Long (0 MOA)1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x Schultz & Larsen Picatinny Rings 30mm, 7mm BH, Steel1 x Schultz & Larsen Weaver Rings 30mm, 4mm BH, Steel1 x Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)1 x Schultz & Larsen Picatinny Rail for Victory (20 MOA)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]1 x Recknagel SECURA Sling Swivel Magnum 25.4mm [22011-9500]1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Starkie Blue (A.K.A Smurf Poo)2 x Krieghoff Navy Gun Slip1 x Jones Original Pad Adjuster1 x Custom Rifles of Great Britain by Bruce Potts1 x Black Leather Shell/Cartridge Pouch1 x Jones Gun Nut Kit1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Ebony & Brass 20 Bore Snap Caps1 x Jones Thru-the-Pad Adjuster1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Schmierfix Grease by Liqui Moly1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Krieghoff Spares Kit1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Krieghoff Pro Choke Box1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Gerber GDC Zip Blade2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Krieghoff "K" Denim Cap - Grey1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x K-80 Barrel Weight Balance System3 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes4 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x ERATAC Picatinny Riser Mount Block (QD)1 x ERATAC Picatinny Riser Mount Block (Nut)1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC KeyMod Picatinny Rail. 5 Slots [T4905-0010]1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)2 x ERATAC Picatinny Extended Riser Mount (Nut)1 x ERATAC Offset UNI-Interface to UNI-Interface [T0960-0005]1 x ERATAC KeyMod Adaptor for HK Hook [T4500-0000]1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x ERATAC Two-Piece Picatinny Rings (Lever)1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x ERATAC M-Lok for QD Sling Swivel [T5510-0000]1 x ERATAC M-Lok Picatinny Rail, 5 Slots [T5905-0008]1 x ERATAC M-Lok Picatinny Rail, 3 Slots [T5903-0008]1 x ERATAC M-Lok Picatinny Rail, 7 Slots [T5907-0008]
Manufacturers
Useful Information