Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint3 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Brass Front Sight Bead2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Navy Gun Slip2 x Krieghoff Trigger Screw2 x Krieghoff Spares Kit2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Anschütz Biathlon Harness1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff "K" Denim Cap - Grey2 x Krieghoff Woven Fabric Patch2 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x K-80 Stock Weight for Balance System2 x Jones Gun Nut Kit1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)2 x Black Barrel Case (83cm Internal)1 x WalkStool Set of Spare Red Spring1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ebony & Brass 20 Bore Snap Caps1 x Black Leather Shell/Cartridge Pouch1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight2 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)2 x Custom Rifles of Great Britain by Bruce Potts1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x MSA Sordin - Hygiene Kit - Foam Seals1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x WalkStool Comfort 65 (65cm/26in)2 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Schmierfix Grease by Liqui Moly1 x ERATAC ACI Bubble Level [T0940-0000]1 x Krieghoff Front Sight Bead (Small)1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)3 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Contessa Spare Ring-to-Base Screws2 x Krieghoff K-80 Sport Logo Cap Black & Red2 x AimZonic Compact Camo Sound Moderator1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]2 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Krieghoff Factory Hanger Pin1 x Krieghoff Achievement Badge 25 Straight1 x Krieghoff Comb Wrench (T-Handle)1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Bauer Outdoor 8x21 Binoculars1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Bauer ED 10x42 Binoculars1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Krieghoff "K" Mesh Cap - Black1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (05)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff 2013 Badge (Collectors Badge)1 x Krieghoff 12b Choke Wrench1 x Krieghoff C-Clips (E-Clips)1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Badge - Cob Bronze1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)
Manufacturers
Useful Information