Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
6 x VFG Adaptor for VFG Rods (Spare)5 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)4 x VFG Adaptor for Parker Hale English Rods (over 7mm)2 x Krieghoff Navy Gun Slip3 x Krieghoff HIVIZ Pro Sights3 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Trigger Screw2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x VFG Magnetic Felt Clamps for Vices - 125mm2 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint3 x VFG Pull Through Pocket Set for .22 Upwards1 x AimZonic Plus Camo Sound Moderator2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x AimZonic Compact Camo Sound Moderator3 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Magnetic Felt Clamps for Vices - 150mm2 x VFG Magnetic Felt Clamps for Vices - 80mm2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor2 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Teague Precision Choke Key1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x MSA Sordin - Hygiene Kit - Foam Seals3 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel SOB3D Silencer (Standard Thread)3 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x Bauer Outdoor 8x21 Binoculars1 x Recknagel Replacement Polyform Lever [00088-5700]1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Bauer Outdoor 10x25 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Walkstool Steady2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Jones Thru-the-Pad Adjuster1 x WalkStool Spare Leg Joints1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Jones Original Pad Adjuster1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Set of Spare Red Spring2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Jones Gun Nut Kit1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)3 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Briley 20b Speed Wrench - For Krieghoff1 x VFG Complete Set for .1771 x Starkie Blue (A.K.A Smurf Poo)1 x Custom Rifles of Great Britain by Bruce Potts2 x Schmierfix Grease by Liqui Moly1 x Black Leather Shell/Cartridge Pouch1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff Pro Choke Box1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)2 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Schultz & Larsen Take Down Rifle Case2 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff Ejector Ball and Spring1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x K-80 Forward Position Trigger - Steel2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)2 x Krieghoff Brass Mid Sight Bead5 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)5 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)3 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)3 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Adaptor for VFG Rods Brass1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Krieghoff Woven Fabric Patch2 x Krieghoff Sight Bead Blanking Screw2 x Krieghoff 28b Choke Wrench3 x Krieghoff Stock Removal Wrench1 x Krieghoff Shell Bag1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Choke Multi Wrench3 x Krieghoff Factory Hanger Pin1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff 12b Choke Wrench1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x K-80 Stock Weight for Balance System1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Forward Position Trigger - Titanium1 x K-80 Standard Trigger - Gold Plated2 x K-80 Forward Position Trigger - Gold Titanium1 x K-80 Standard Trigger - Steel1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Standard Trigger - Titanium1 x K-80 Standard Trigger - Gold Titanium1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)
Manufacturers
Useful Information