Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Recknagel Standard Banded Swivel Ring [22620-....]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Custom Rifles of Great Britain by Bruce Potts2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]2 x Krieghoff Sight Bead Blanking Screw2 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended2 x Krieghoff Fine Leather Gun Case (K-80 Parcours)3 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]2 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff "K" Denim Cap - Grey2 x VFG Adaptor for Parker Hale English Rods (over 7mm)3 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor3 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Black Barrel Case (83cm Internal)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x Krieghoff Pro Choke Box1 x AimZonic Plus Camo Sound Moderator1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Anschütz Biathlon Harness1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff "K" Collectors Badge1 x Jones Original Pad Adjuster1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]2 x Teague Precision Choke Key2 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Schultz & Larsen Professional Bipod by Spartan1 x K-80 Stock Weight for Balance System1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (036)1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Krieghoff "K" Logo Cap Navy & White1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x K-80 Standard Trigger - Steel1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Krieghoff Brass Front Sight Bead1 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (05)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Picatinny Rail Sako Long, Alu, 20 MOA [..2114]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)
Manufacturers
Useful Information