Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Recknagel Standard Banded Swivel Ring [22620-....]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Black Leather Shell/Cartridge Pouch1 x Custom Rifles of Great Britain by Bruce Potts2 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor3 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]2 x Krieghoff Sight Bead Blanking Screw2 x AimZonic Compact Camo Sound Moderator2 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended2 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Recknagel Steel Stock Trap Door3 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]2 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff "K" Denim Cap - Grey2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Krieghoff Factory Hanger Pin2 x VFG Adaptor for Parker Hale English Rods (over 7mm)3 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor2 x VFG Pull Through Pocket Set for .22 Upwards2 x Krieghoff Front Sight Bead (Standard)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Black Barrel Case (83cm Internal)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x Krieghoff Pro Choke Box1 x AimZonic Plus Camo Sound Moderator1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Anschütz Biathlon Harness1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff "K" Collectors Badge1 x Jones Original Pad Adjuster1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Teague Precision Choke Key1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Schultz & Larsen Professional Bipod by Spartan1 x K-80 Stock Weight for Balance System1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)
Manufacturers
Useful Information