Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Jones Gun Nut Kit1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]2 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Recknagel Picatinny Rail 204mm Blank, Alu [..0120]2 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]1 x Contessa Picatinny Rail - Haenel Jager 10 (0 MOA)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA) - Extended1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Superknife SK Edge Utility - Camo (3 for 1 Special Offer)1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Recknagel Sling Swivel Loop - 20mm, M4 Screw [21215-1016]1 x Krieghoff 2009 Badge (Collectors Badge)1 x Krieghoff Achievement Badge 200 Straight (Black)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)4 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor2 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable4 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)2 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x Winchester 3" Folding Knife1 x VFG Adaptor for VFG Rods Brass2 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]2 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]2 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel Picatinny Rail Mauser M12, Steel [..002L]1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable2 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)2 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Contessa Picatinny Rail - Sako 75/85 Medium (20 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]1 x Recknagel Picatinny Rail Marlin 1894, Alu [..001V]1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Picatinny Rail Mauser 98, Steel [..0010]1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Alu [..2010]1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)
Manufacturers
Useful Information