Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Adaptor for Thermal and Night Vision Devices - 56mm2 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Krieghoff Brass Front Sight Bead2 x Custom Rifles of Great Britain by Bruce Potts1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Jones Thru-the-Pad Adjuster2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Recknagel 40mm Ring Components - 5mm BH2 x Krieghoff Pro Choke Box3 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Briley 20b Speed Wrench - For Krieghoff1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Recknagel Super Express 1 Leaf Sight [15400-3025]2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff HIVIZ Pro Sights2 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x ERATAC KeyMod Picatinny Rail. 7 Slots [T4907-0010]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Jones Gun Nut Kit1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Schmierfix Grease by Liqui Moly2 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)2 x Bauer ED 8x42 Binoculars1 x Gerber Myth Series Fixed Saw1 x Bauer HD 8.5x50 Binoculars2 x Bauer HD Series 8x25 Binoculars1 x Bauer HD 8x42 Binoculars1 x Krieghoff K-Diamond Beanie - Heather Grey1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Krieghoff K-Diamond Beanie - Burgundy1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x ERATAC KeyMod Picatinny Rail. 5 Slots [T4905-0010]1 x ERATAC KeyMod Picatinny Rail. 9 Slots [T4909-0010]1 x Recknagel Picatinny Rail Marlin 1895 / 336, Alu [..001S]1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x AimZonic Plus Camo Sound Moderator1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings2 x Bauer Outdoor 8x21 Binoculars1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x AimZonic Compact Camo Sound Moderator1 x Bauer HD 8x56 Binoculars1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Picatinny Rail Sako Long, Alu, 20 MOA [..2114]1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x Contessa Browning BAR Euro Rail for Quick Release Mount2 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount2 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Remington 700 Short Euro Rail Base for QR Mount2 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable1 x Bear Grylls Scout Essentials Kit1 x Ex-Display Gerber GDC Zip Hex1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (20 MOA)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)2 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Bauer - One Piece Railmount 25.4mm (11mm High)2 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount2 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II
Manufacturers
Useful Information