Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Contessa Picatinny Rail - Howa 1500 Short (10 MOA)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Recknagel Picatinny Rail Mauser 98, 20 MOA, Steel [..2010]1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Recknagel Picatinny Rail Sauer 202 Std, Steel [..0080]2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)3 x Krieghoff HIVIZ Pro Sights2 x Krieghoff Brass Front Sight Bead2 x Krieghoff "K" Denim Cap - Grey2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff "K" Mesh Cap - Black3 x Krieghoff Woven Fabric Patch1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Bauer Outdoor 10x25 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x ERATAC Bubble Level [T0940-0002]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Bauer Outdoor 8x21 Binoculars1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x AG3 / 392A Alkaline Batteries (10 Pack)2 x Recknagel SOB3D Silencer (Standard Thread)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Briley 20b Speed Wrench - For Krieghoff1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Teague Precision Choke Key2 x Schultz & Larsen Take Down Rifle Case1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x AimZonic Plus Camo Sound Moderator1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Schmierfix Grease by Liqui Moly1 x Custom Rifles of Great Britain by Bruce Potts1 x Black Leather Shell/Cartridge Pouch1 x WalkStool Spare Leg Joints1 x Starkie Blue (A.K.A Smurf Poo)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff Comb Wrench (T-Handle)1 x Jones Thru-the-Pad Adjuster1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Ebony & Brass 20 Bore Snap Caps2 x Jones Original Pad Adjuster1 x Black Barrel Case (83cm Internal)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x AimZonic Compact Camo Sound Moderator1 x WalkStool Set of Spare Red Spring1 x Krieghoff Extended Pillars for Adjustable Comb1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff Trigger & Selector Locking Wrench2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Picatinny Rail - Sauer 202 (10 MOA)2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Krieghoff Front Sight Bead (Small)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Quick Release Picatinny Rail1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)2 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Krieghoff Classic "Big Five" Badge2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff 2015 Badge (Collectors Badge)2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Hi Viz - How to Become a Better Shooter1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff 2011 Badge (Collectors Badge)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Krieghoff Navy Gun Slip1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x Krieghoff C-Clips (E-Clips)1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x K-80 Stock Weight for Balance System1 x K-80 Standard Trigger - Titanium1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Krieghoff Trigger Screw1 x Badge - Cob Bronze1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Forward Position Trigger - Gold Plated1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Krieghoff K-Diamond Beanie - Heather Grey1 x K-80 Standard Trigger - Gold Plated1 x Gerber Metolius Pocket Folder1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA
Manufacturers
Useful Information