Krieghoff Pad Adjuster Unit (Pre Fitted)

£350.00
20% VAT incl.

Available Options

  • Model:K-PAD-ADJ-PF
The Krieghoff Pad Adjuster (Pre-Fitted)
This unit comes either with or without a pad, but the unit does not need fitting.

The Pad Adjuster Unit (Pre-Fitted) has been pre-fitted to K-80 Trap Special Stock Dimensions. It will not fit any other stock other than Trap Special.

Note: This part will require ordering from Krieghoff, Germany. Delivery will be between 5-10 days

This Adjuster allows you to manoeuvrer the butt plate in a variety of different ways to suit you. The recoil pad is not included with this adjuster unit, but you can select to have a recoil pad with for an additional price. The different pad options are below. The pad is aligned and adjusted in several different ways to give you the perfect fit while shooting. There is the option to lengthen the stock by using spacers, which will work with the Krieghoff pad available. You can choose to fit your own pad to the unit, such as a Kick-Eez pad, which does mean that the spacers used with the unit will not then fit the pad.

The possible adjustments allow you to set the following:

Adjust:
- Heel In/Out
- Toe In/Out
- Lateral Adjustment
- Drop
- Pitch

Dimensions:
Height - 132mm
Width - 45mm
Thickness of Unit - 19mm (without Pad)
Thickness of Unit - 42mm (with Krieghoff Pad)

You can use additional spacers to lengthen the unit. The spacers do only work with the Krieghoff Pad, so if you are fitting your own pad, such as a Kick-Eez pad, then the spacers will not be compatible.
Thickness of Spacer - 6.4mm

For details on fitting and the possible adjustments available,
please view the Krieghoff Adjustable Pad Manual

Options for this Adjuster Unit.
You can select from the options below to have the Pad Adjuster Unit (Pre-Fitted) without a recoil pad, or with a recoil pad for additional cost.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x VFG Pull Through Match Pocket Set, for 4-4.5mm2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Krieghoff Navy Gun Slip2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)3 x Krieghoff HIVIZ Pro Sights2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff Brass Front Sight Bead1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Krieghoff "K" Denim Cap - Grey2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red2 x Anschütz Biathlon Harness1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Trigger Screw1 x Schultz & Larsen Professional Bipod by Spartan2 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Winchester 3" Folding Knife1 x K-80 Stock Weight for Balance System1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x WalkStool Comfort 65 (65cm/26in)1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff Front Sight Bead (Standard)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Black Leather Shell/Cartridge Pouch1 x AimZonic Compact Camo Sound Moderator1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Jones Gun Nut Kit1 x Contessa Spare Ring-to-Base Screws1 x AimZonic Plus Camo Sound Moderator1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Silva Dine Duo Kit - Turquoise/White1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)2 x EX Demo - Gerber Metolius Pocket Folder1 x K-80 Barrel Weight Balance System1 x K-80 Forward Position Trigger - Gold Plated1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Silva Dine Duo Kit - Purple/White1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x LED Lenser Intelligent Filter Set with Holster1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Silva Commute Bike Light - Pink1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)
Manufacturers
Useful Information