K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Schmierfix Grease by Liqui Moly1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Anschütz Biathlon Harness1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x Krieghoff HIVIZ Pro Sights1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Krieghoff Woven Fabric Patch1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x Krieghoff Spares Kit1 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Krieghoff Brass Front Sight Bead1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Jones Original Pad Adjuster1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Jones Thru-the-Pad Adjuster1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff 12b Choke Wrench1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Steel Stock Trap Door1 x AimZonic Plus Camo Sound Moderator1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Krieghoff Comb Wrench (T-Handle)1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Recknagel Grip Cap Compartment1 x K-80 Forward Position Trigger - Titanium1 x K-80 Forward Position Trigger - Gold Titanium1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x AimZonic Compact Camo Sound Moderator1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Weaver/Picatinny Mounts for S&B Rail (QD Lever)1 x Recknagel Picatinny Bases - Remington 700 (6-48)1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu
Manufacturers
Useful Information