K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Bolt & Weight Balance System
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
 Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

K-80 Forward Position Trigger - Titanium
K-80 Forward Position Trigger - Titanium
£320.00
20% VAT incl.
View
Krieghoff Sight Bead Blanking Screw
Krieghoff Sight Bead Blanking Screw
£1.00
20% VAT incl.
View
Krieghoff Trigger & Selector Locking Wrench
Krieghoff Trigger & Selector Locking Wrench
£1.50
20% VAT incl.
View
Krieghoff Safety Catch Locking Screw Wrench
Krieghoff Safety Catch Locking Screw Wrench
£1.50
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
1 x Krieghoff Woven Fabric Patch1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff "K" Denim Cap - Grey2 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Krieghoff Brass Front Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]4 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box1 x Anschütz Biathlon Harness1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Krieghoff Front Sight Bead (Small)2 x Krieghoff Sight Bead Blanking Screw2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Bauer Outdoor 10x25 Binoculars2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Walkstool Steady1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer HD Series 8x25 Binoculars1 x Recknagel SOB3D Silencer (ERA LOC)2 x Schmierfix Grease by Liqui Moly1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Bauer Outdoor 8x21 Binoculars2 x Jones Thru-the-Pad Adjuster1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]3 x K-80 Stock Weight for Balance System1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Teague Precision Choke Key2 x Jones Original Pad Adjuster1 x Black Leather Shell/Cartridge Pouch1 x Schultz & Larsen Take Down Rifle Case2 x Krieghoff Extended Pillars for Adjustable Comb1 x K-80 Barrel Weight Balance System1 x Jones Gun Nut Kit3 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff C-Clips (E-Clips)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Briley 20b Speed Wrench - For Krieghoff2 x Krieghoff Navy Gun Slip1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff Stock Removal Wrench1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Krieghoff Factory Hanger Pin1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Krieghoff 28b Choke Wrench1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel 36mm Ring Components - 5mm BH1 x Krieghoff Brass Mid Sight Bead1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Front Ramp Hood ATV [13093-1810]1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x Recknagel Weaver/Picatinny Mounts for S&B Rail (QD Lever)1 x K-80 Standard Trigger - Titanium1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel 34mm Ring Components - 5mm BH1 x Recknagel Hood for Front Ramp [13020-1580]1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x Recknagel 30mm Ring Components - 5mm BH1 x Recknagel Ring Base for Rear Sight [16510-0185]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x K-80 Standard Trigger - Gold Plated1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Recknagel Picatinny Rail Browning A Bolt 3 Long, Alu [..012T]1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Picatinny Rail 404mm Blank, Alu [..0140]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable
£43,354.81
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Kick-Eez All Purpose Pad (301) Recoil Pad Spacer (1/4" or 1/8" Thick) K-80 Barrel Weight Balance System