K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)3 x Krieghoff HIVIZ Pro Sights1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Recknagel Picatinny Rail Steyr-Mannlicher L, 0 MOA, Alu [..0188]1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Krieghoff Navy Gun Slip1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x Krieghoff Spares Kit1 x Krieghoff Sight Bead Blanking Screw1 x K-80 Stock Weight for Balance System1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x AimZonic Compact Camo Sound Moderator1 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Factory Hanger Pin1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff 12b Choke Wrench1 x Teague Precision Choke Key1 x Black Barrel Case (83cm Internal)1 x Krieghoff Trigger & Selector Locking Wrench1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Jones Original Pad Adjuster1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x K-80 Forward Position Trigger - Gold Titanium
Manufacturers
Useful Information