K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Krieghoff Woven Fabric Patch2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)4 x Krieghoff HIVIZ Pro Sights1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]3 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x EX Demo - Gerber Metolius Pocket Folder1 x Contessa Picatinny Rail - Sako 75/85 X-Short (10 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Anschütz Biathlon Harness2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Schultz & Larsen Professional Bipod by Spartan2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Krieghoff Brass Front Sight Bead1 x Recknagel Picatinny Rail Savage Short 0 MOA, Alu [..0093]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box2 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Jones Original Pad Adjuster1 x WalkStool Comfort 65 (65cm/26in)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Teague Precision Choke Key1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Stock Removal Wrench1 x Bauer Outdoor 8x21 Binoculars1 x Krieghoff "K" Logo Cap Black & White2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Bauer HD Series 8x25 Binoculars1 x Schmierfix Grease by Liqui Moly1 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Black Leather Shell/Cartridge Pouch1 x Custom Rifles of Great Britain by Bruce Potts1 x K-80 Forward Position Trigger - Black Titanium1 x Starkie Blue (A.K.A Smurf Poo)1 x K-80 Standard Trigger - Gold Plated2 x K-80 Stock Weight for Balance System1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Front Sight Bead (Small)1 x Briley 20b Speed Wrench - For Krieghoff1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x K-80 Standard Trigger - Steel1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Sight Bead Blanking Screw1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail
Manufacturers
Useful Information