K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - Remington 700 Long (10 MOA)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)3 x Krieghoff HIVIZ Pro Sights1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff Brass Front Sight Bead1 x Parker Hale Thread to 8-32 Thread Converter2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)3 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Anschütz Biathlon Harness1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor3 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)2 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II2 x Contessa Quick Release Picatinny Rail1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount2 x Krieghoff "K" Denim Cap - Grey1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Krieghoff Front Sight Bead (Small)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA2 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA2 x Krieghoff "K" Mesh Cap - Black1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Teague Precision Choke Key1 x Jones Thru-the-Pad Adjuster1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Jones Gun Nut Kit1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x WalkStool Set of Spare Red Spring1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Krieghoff Brass Mid Sight Bead1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x ERATAC Bubble Level [T0940-0002]2 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x WalkStool Spare Leg Joints1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ex-Display Gerber GDC Zip Hex1 x Gerber Dime Multi-Tool (Lime)1 x Krieghoff Comb Wrench (T-Handle)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Black Leather Shell/Cartridge Pouch1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Achievement Badge 25 Straight1 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Recknagel Steel Stock Trap Door1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Contessa Picatinny Rail - CZ 452 / 455 (10 MOA)1 x Contessa Picatinny Rail - Tikka T3 / T3X (30 MOA)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Picatinny Rail - Tikka T3 / T3X (10 MOA)1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extend/Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Contessa Picatinny Rail - Sako 75/85 Medium (20 MOA)1 x Contessa Picatinny Rail - Sako A7 Short (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Recknagel Picatinny Rail Sabatti Rover Short, Alu [..0075]
Manufacturers
Useful Information