K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)4 x Krieghoff HIVIZ Pro Sights3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Spares Kit1 x Krieghoff Trigger Screw1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff Woven Fabric Patch3 x Schultz & Larsen Professional Bipod by Spartan2 x Anschütz Biathlon Harness2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm3 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Krieghoff Brass Front Sight Bead2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud2 x Schmierfix Grease by Liqui Moly1 x Krieghoff "K" Mesh Cap - Black1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Jones Original Pad Adjuster1 x Recknagel SOB01 Silencer (Standard Thread)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Krieghoff Extended Pillars for Adjustable Comb1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x AimZonic Plus Camo Sound Moderator2 x AimZonic Compact Camo Sound Moderator1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Jones Thru-the-Pad Adjuster1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]2 x Black Barrel Case (83cm Internal)1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]2 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel Grip Cap Domed Blank [24000-0400]2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x Krieghoff Front Sight Bead (Standard)1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Krieghoff Navy Gun Slip1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Krieghoff Front Sight Bead (Small)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x Krieghoff Brass Mid Sight Bead2 x Krieghoff Sight Bead Blanking Screw1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Recknagel Safety for Mauser K98 [30100-5000]1 x K-80 Forward Position Trigger - Steel1 x K-80 Standard Trigger - Black Titanium1 x K-80 Standard Trigger - Steel1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Bauer Outdoor 8x21 Binoculars1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Jones Gun Nut Kit1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x ERATAC Bubble Level [T0940-0002]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Black Leather Shell/Cartridge Pouch1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Krieghoff Stock Removal Wrench1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Bear Grylls Scout Essentials Kit1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x K-80 Stock Weight for Balance System1 x Bauer HD 8x56 Binoculars1 x AA x 4 Camelion Plus Alkaline Batteries1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Krieghoff Comb Wrench (T-Handle)1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]
Manufacturers
Useful Information