K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Krieghoff Trigger Screw2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff Pro Choke Box2 x Krieghoff Spares Kit1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff "K" Mesh Cap - Black1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x Recknagel Picatinny Rail Sako Long, Alu, 20 MOA [..2114]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Bear Grylls Paracord Fixed Blade1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)3 x Schmierfix Grease by Liqui Moly1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x AimZonic Plus Camo Sound Moderator3 x Krieghoff HIVIZ Pro Sights2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Krieghoff Brass Front Sight Bead2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Anschütz Biathlon Harness1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x K-80 Stock Weight for Balance System1 x Krieghoff Sight Bead Blanking Screw1 x Black Barrel Case (83cm Internal)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Walkstool Steady1 x WalkStool Set of Spare Red Spring1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Gerber GDC Zip Blade1 x Custom Rifles of Great Britain by Bruce Potts1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Gerber Myth Series Fixed Saw1 x Bauer HD Series 8x25 Binoculars1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ebony & Brass 20 Bore Snap Caps1 x Gerber Basic Fixed Blade Serrated1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff Choke Multi Wrench1 x Bear Grylls Scout Essentials Kit1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]
Manufacturers
Useful Information