Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

4 x Walkstool Steady4 x WalkStool Set of Spare Red Spring5 x Krieghoff Navy Gun Slip3 x Black Barrel Case (83cm Internal)5 x K-80 Stock Weight for Balance System3 x Krieghoff Comb Wrench (T-Handle)4 x Jones Original Pad Adjuster3 x Jones Gun Nut Kit4 x Krieghoff Stock Removal Wrench4 x Jones Thru-the-Pad Adjuster5 x Teague Precision Choke Key5 x Krieghoff Extended Pillars for Adjustable Comb4 x K-80 Barrel Weight Balance System1 x Bauer Outdoor 10x25 Binoculars1 x Bauer HD Series 8x25 Binoculars2 x Bauer Outdoor 8x21 Binoculars2 x AG3 / 392A Alkaline Batteries (10 Pack)3 x K-80 Forward Position Trigger - Gold Titanium5 x K-80 Standard Trigger - Titanium3 x K-80 Standard Trigger - Gold Titanium3 x K-80 Forward Position Trigger - Titanium4 x K-80 Forward Position Trigger - Black Titanium5 x K-80 Standard Trigger - Black Titanium1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Recknagel Picatinny Rail Savage Long 20 MOA, Alu [..2193]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Krieghoff 28b Choke Wrench2 x AimZonic Compact Camo Sound Moderator4 x Krieghoff 12b Choke Wrench1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Krieghoff Trigger & Selector Locking Wrench2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Krieghoff Choke Multi Wrench2 x Krieghoff .410g Choke Wrench1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail3 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Briley 12b Speed Wrench - For Briley Spectrum Chokes3 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x AimZonic Plus Camo Sound Moderator1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)3 x Krieghoff K80 Speed Wrench for KTW Chokes3 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set3 x Krieghoff K80 Speed Wrench for Factory Chokes3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Krieghoff Safety Catch Locking Screw Wrench5 x Krieghoff Factory Hanger Pin1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Krieghoff "K" Denim Cap - Grey1 x K-80 Standard Trigger - Steel1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (ERA LOC)4 x Krieghoff Brass Front Sight Bead2 x Recknagel SOB3D Silencer (Standard Thread)5 x Krieghoff HIVIZ Pro Sights2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x K-80 Forward Position Trigger - Steel1 x K-80 Forward Position Trigger - Gold Plated1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x K-80 Standard Trigger - Gold Plated2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)4 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes3 x Schmierfix Grease by Liqui Moly2 x Krieghoff Brass Mid Sight Bead4 x Krieghoff C-Clips (E-Clips)2 x Krieghoff Front Sight Bead (Standard)2 x Krieghoff Sight Bead Blanking Screw2 x Briley 20b Speed Wrench - For Krieghoff3 x Krieghoff Trigger Screw1 x Krieghoff Front Sight Bead (Small)2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Krieghoff Pro Choke Box2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff "K" Denim Cap - Navy2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x Krieghoff Woven Fabric Patch1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Schultz & Larsen Take Down Rifle Case1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff "K" Logo Cap Navy & White1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Ebony & Brass 20 Bore Snap Caps1 x Custom Rifles of Great Britain by Bruce Potts1 x Starkie Blue (A.K.A Smurf Poo)1 x Black Leather Shell/Cartridge Pouch1 x Krieghoff "K" Collectors Badge1 x Krieghoff 2018 DTL Badge (Collectors Badge)4 x WalkStool Comfort 65 (65cm/26in)2 x WalkStool Spare Leg Joints1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff 2013 Badge (Collectors Badge)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Krieghoff K-Diamond Beanie - Navy1 x Krieghoff K-80 Sport Logo Cap Black & Red2 x Winchester 3" Folding Knife1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Gerber Powerframe Knife1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x EX Demo - Gerber Metolius Pocket Folder1 x Bauer ED 10x42 Binoculars1 x AA x 4 Camelion Plus Alkaline Batteries1 x Bauer HD 8x56 Binoculars1 x Bauer HD 8x42 Binoculars1 x Bauer ED 8x32 Binoculars1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0010]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (05)1 x Ex-Demo K-80 Steel 12b Hanger #61 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Silva Dine Duo Kit - Turquoise/White
Manufacturers
Useful Information