K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x WalkStool Set of Spare Red Spring1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Krieghoff Brass Front Sight Bead1 x K-80 Standard Trigger - Titanium1 x Krieghoff .410g Choke Wrench1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x AimZonic Plus Camo Sound Moderator1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Jones Gun Nut Kit1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Krieghoff Navy Gun Slip1 x Black Leather Shell/Cartridge Pouch1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Black Barrel Case (83cm Internal)1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Bauer Outdoor 10x25 Binoculars1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x K-80 Barrel Weight Balance System1 x Krieghoff Stock Removal Wrench1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x ERATAC M-Lok Picatinny Rail, 5 Slots [T5905-0008]1 x ERATAC M-Lok Picatinny Rail, 9 Slots [T5909-0008]
Manufacturers
Useful Information