K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Krieghoff K-Diamond Beanie - Navy2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Gun Slip2 x Krieghoff HIVIZ Pro Sights2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Woven Fabric Patch2 x Krieghoff Pro Choke Box1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Trigger Screw2 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x K-80 Stock Weight for Balance System2 x Krieghoff Brass Front Sight Bead1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)3 x Krieghoff Sight Bead Blanking Screw1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x K-80 Forward Position Trigger - Steel1 x K-80 Forward Position Trigger - Gold Plated1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel 40mm Ring Components - 5mm BH1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]2 x Krieghoff Spares Kit1 x Bear Grylls Ultra Compact Knife1 x Schultz & Larsen Torx Key for Scope Mounts1 x AimZonic Compact Camo Sound Moderator1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)2 x Recknagel SOB3D Silencer (ERA LOC)1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)2 x Krieghoff Comb Wrench (T-Handle)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Recknagel SOB01 Silencer (Standard Thread)1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Recknagel Barrel Banded Front Ramp [12530-....]2 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Standard Trigger - Titanium1 x WalkStool Set of Spare Red Spring1 x K-80 Forward Position Trigger - Gold Titanium1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Krieghoff "K" Mesh Cap - Black1 x WalkStool Spare Leg Joints1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff Factory Hanger Pin1 x Recknagel Front Ramp [12000-0000]1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Schmierfix Grease by Liqui Moly1 x K-80 Standard Trigger - Steel1 x K-80 Forward Position Trigger - Titanium2 x Krieghoff Extended Pillars for Adjustable Comb1 x Black Barrel Case (83cm Internal)1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel SOB02 Silencer (Standard Thread)1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Recknagel Picatinny Tri-Nut Rings 30mm [57030-0500]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel 36mm Ring Components - 5mm BH1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Jones Original Pad Adjuster1 x Recknagel 30mm Ring Components - 5mm BH1 x Gerber Metolius Pocket Folder1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x ERATAC ACI Elevation Turret [T0941-0000]
Manufacturers
Useful Information