K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Bolt & Weight Balance System
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
 Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

K-80 Forward Position Trigger - Titanium
K-80 Forward Position Trigger - Titanium
£320.00
20% VAT incl.
View
Krieghoff Sight Bead Blanking Screw
Krieghoff Sight Bead Blanking Screw
£1.00
20% VAT incl.
View
Krieghoff Trigger & Selector Locking Wrench
Krieghoff Trigger & Selector Locking Wrench
£1.50
20% VAT incl.
View
Krieghoff Safety Catch Locking Screw Wrench
Krieghoff Safety Catch Locking Screw Wrench
£1.50
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm3 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff 12b Choke Wrench1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff Navy Gun Slip1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Bauer HD Series 8x25 Binoculars2 x K-80 Standard Trigger - Steel1 x Schmierfix Grease by Liqui Moly1 x K-80 Forward Position Trigger - Gold Plated1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Brass Mid Sight Bead1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (036)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x K-80 Stock Weight for Balance System1 x Gerber GDC Zip Blade1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x K-80 Forward Position Trigger - Black Titanium1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x AimZonic Plus Camo Sound Moderator1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Comb Wrench (T-Handle)
£6,845.13
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Kick-Eez All Purpose Pad (301) Recoil Pad Spacer (1/4" or 1/8" Thick) K-80 Barrel Weight Balance System