Schultz & Larsen Slide & Lock for Zeiss Rail, Med (11mm BH)

£210.00
20% VAT incl.

Available Options

  • Model:SL60ZR
Schultz & Larsen Slide & Lock Mounts for
Zeiss Rail - Medium (11mm Base Height)

45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process. Will fit Zeiss Scopes with the Zeiss Rail fitting.

Total Weight of Both Mounts - 122g
Base Height (BH) - 11mm
Code Ref: SL60ZR

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Pro Choke Box1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Schultz & Larsen Take Down Rifle Case2 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Krieghoff 12b Choke Wrench1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Factory Hanger Pin1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Recknagel SOB3D Silencer (ERA LOC)1 x K-80 Forward Position Trigger - Titanium1 x Silva Dine Duo Kit - Turquoise/White1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Gerber GDC Zip Blade1 x Anschütz Biathlon Harness1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Jones Original Pad Adjuster1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x K-80 Forward Position Trigger - Steel1 x K-80 Forward Position Trigger - Gold Titanium1 x Krieghoff Trigger & Selector Locking Wrench1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]
Manufacturers
Useful Information