Krieghoff Steel Front Hanger Fixed Choke Barrels

£110.00
20% VAT incl.

Available Options

  • Model:KFHFCT
Krieghoff factory front hanger allows changes in point of impact of bottom barrel. Available for both Choke-tubed and Fixed choke barrel configurations. Please note that Briley or Teague choked K-80 will have a Fixed Choke barrel profile so choose the hanger for fixed choke barrels.

The change in point of impact will with vary barrel length and the only way to determine the exact amount is by pattern testing. As a rough guide you can estimate that each change of hanger size will move the POI 65mm (2.5") at 30 metres.

It is important to understand that the numbering system for CT hangers is not the same as that for Fixed Choke hangers. The barrel diameter of the Choke tube barrels is larger and so a #1 CT Hanger is roughly equivalent to a #3 Fixed Choke hanger. This means that a Choke Tubed gun shooting to your preferred POI with a #4 hanger equates to a #6 Hanger on a Fixed Choke pair of barrels. This is a guide only and you do need to pattern test to establish the exact hanger.

Hangers are easily changed by driving out the cross pin with the correct sized pin punch (1.4mm). Remove the hanger, install the new one and replace the cross pin. We recommend using a 0.9mm pin punch to support the hollow pin whilst it is being replaced. You can obtain the correct size Pin Punches elsewhere in the store.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

2 x Schultz & Larsen Professional Bipod by Spartan2 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Bauer Power LED L-M1 Torch1 x Krieghoff "K" Bobble Beanie - Navy1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)3 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Krieghoff Spares Kit1 x Krieghoff Trigger Screw1 x Schultz & Larsen Take Down Rifle Case1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)2 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa Picatinny Rail - Sako S20 (20 MOA)1 x Recknagel SOB02 Silencer (Standard Thread)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Krieghoff Brass Mid Sight Bead1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Krieghoff Steel Middle Hanger (For Parcours)
Manufacturers
Useful Information