Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)

£228.11
20% VAT incl.


  • Model:57945-0700
Recknagel Weaver/Picatinny Mounts for Zeiss Rail with 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with Tri-Nut Fastening

Also available in Quick Release Lever Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts and Wrench Key
Code Ref: 57945-0700

These Tip-off mounts are designed to be used with the Zeiss Rail Rifle Scopes with the 45º angle, especially the Zeiss Diarange. Fit to both Weaver and Picatinny Rails. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using the supplied wrench.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint3 x Krieghoff HIVIZ Pro Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel Picatinny Rail Browning X Bolt Super S, Alu [..021P]1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Krieghoff Brass Front Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA)1 x Krieghoff Trigger Screw1 x Krieghoff Spares Kit2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Silva Dine Duo Kit - Turquoise/White1 x LED Lenser Intelligent Filter Set with Holster1 x Silva Commute Bike Light - Green1 x Ex-Display Gerber GDC Zip Hex1 x Gerber Metolius Pocket Folder1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Jones Thru-the-Pad Adjuster1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight
Manufacturers
Useful Information