K-80 Forward Position Trigger - Titanium

£320.00
20% VAT incl.


  • Model:TTFP
The K-80 TT-Blade. This new style titanium trigger blade from Krieghoff provides a more secure location for your finger in all weather conditions. The vented surface allows water to drain away on the wettest day and your finger locks into the slots. It looks great with the Titanium Hangers and Titanium Choke Tubes! This Forward position Model is for those shooters who need the trigger blade positioned further forward than is possible with the adjustment on the standard trigger.

The Titanium Trigger fits all new model K-80 guns that have the trigger blade attached on a T-slot rail. Earlier guns had a dovetail. If you wish to fit a TT trigger on an earlier gun then you will also need a trigger upgrade. This can be done in our Krieghoff Service facility.

Normally we recommend that you send the receiver of your gun to have the trigger fitted. It is possible to fit the blade yourself but please note the instructions you can read by reading the installation Procedure.

The Trigger Pulls differ between a Standard Trigger and a Forward Position Trigger. The forward position trigger is 1/4 lb heavier.

Fitting:

The K80 trigger blade is adjustable for position along a slide. There are two set screws on the underside of the trigger blade. The screw socket takes a 1.27mm wrench, 0.050″ or 1/20th inch imperial. Use a Krieghoff Trigger/Selector Wrench. The rearmost screw locks the blade onto the slide whilst the front screw locks the barrel selector positioned immediately in front of the trigger blade. There are two trigger blade types, standard position and forward position. The standard blade has both screws in front of the curved blade whilst the forward position trigger has one screw in front and one directly behind the blade. Function of the two screws is the same.

To move the trigger blade, slacken the rear screw but note that the front screw, if locked, will also lock the trigger blade. The front screw has to be far enough out to allow the blade to slide so if it will not move try backing that screw out some more. Occasionally, the blade will be stuck on the slide but is easily freed with a nylon drift. Make sure both screws are free before tapping the blade with anything. Once in position, tighten the rearmost screw to lock the blade on the slide.

To lock the selector, tighten the front screw until the selector cannot be switched left to right. To release the selector, simply slacken that screw off again.

We do not keep a large quantity of this product in stock. This part may need to be ordered in from the Krieghoff Factory. Please allow 5-10 working days for delivery.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.


Watch the Trigger Replacement Instructional Video here:



You might also like...

1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]2 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)4 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Adaptor for VFG Rods (Spare)1 x Ex-Display Bear Grylls Ultimate Pack with Multi-Tool1 x Krieghoff Shooter's Towel - Navy2 x Krieghoff Shooter's Towel - Red3 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)3 x Krieghoff Shell Bag1 x Krieghoff Elite Canvas Gun Slip1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff Shooter's Towel - Black2 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)2 x Bear Grylls Paracord Fixed Blade3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master4 x Krieghoff Pro Choke Box2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Recknagel 30mm Ring Components - 5mm BH1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)2 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x K-80 Forward Position Trigger - Gold Titanium1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Chamber Brush 20b1 x Recknagel SOB01 Silencer (Standard Thread)1 x Krieghoff Factory Hanger Pin2 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Krieghoff K-Diamond Beanie - Heather Navy1 x K-80 Stock Weight for Balance System1 x Chapman Precision Screwdriver Set 9800, 28 Piece (Metric)2 x Krieghoff Spares Kit1 x Recknagel 19mm Dovetail Ring Mounts 30mm1 x Silva Map Measurer (Mechanical)1 x Krieghoff Trigger & Selector Locking Wrench1 x Gerber Octane Multi-Tool Red1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Recknagel SOB02 Silencer (Standard Thread)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount2 x K-80 Standard Trigger - Titanium1 x Krieghoff Trigger Screw1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Krieghoff K-Diamond Beanie - Navy1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Walkstool Steady2 x Recknagel Front Sight Bead Red [11444-0300]1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Recknagel Stock Shield - 2 Point Shield Flat1 x VFG Adaptor fits Tetra Cleaning Rods (8-32 Thread)1 x Recknagel 40mm Ring Components - 5mm BH2 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Holex TORX Screwdriver set of 7 [00062-5057]1 x Gerber Basic Fixed Blade Serrated1 x Recknagel Sling Swivel Loop - 20mm, M4 Screw [21215-1016]1 x Krieghoff Front Sight Bead (Standard)1 x Ex-Demo K-80 Steel 12b Hanger #62 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x AA x 4 Camelion Plus Alkaline Batteries1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)2 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Krieghoff Comb Wrench (T-Handle)1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Silva Dine Duo Kit - Purple/White1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x K-80 Standard Trigger - Gold Titanium1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Gerber Paraframe II Fine Edge Knife1 x Recknagel Stock Shield - 3 Point Shield Contoured1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Schultz & Larsen Picatinny Rail for Victory (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud2 x ERATAC Bubble Level [T0940-0002]1 x Jones Gun Nut Kit1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff 12b Choke Wrench1 x Bauer Power LED L-M1 Torch1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x AimZonic Compact Camo Sound Moderator1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa Picatinny Rail - Remington 700 Short (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Krieghoff Front Sight Bead (Small)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)
Manufacturers
Useful Information