Recknagel Picatinny Rail Sako Short, Alu [..0014]

£130.10
20% VAT incl.


  • Model:57050-0014
Recknagel Picatinny Aluminium Rail for Sako 75/85 Short
Black anodised

Will Fit Sako 75 / 85 / MA05 / I / II / III / MA05 / XS / SM / S
Height of Base - 12.5mm
Code: - 57050-0014

Contents Supplied
- 1x Black Anodised Rail

To mount the rail, separate the rail from the tapered bases. Push the bases onto the Sako receiver and tighten the two vertical locking grub screws to hold in the bases in place. Remount the rail onto the bases.

Dimensions of Adjustments:
The Rail Length is 132mm.
Bases Length: 21mm
Bases Center to Center: Adjustable from 83mm to 121mm
Distance Between Bases: Adjustable from 59mm to 92mm

There is also a picatinny rail designed to fit the Sako 75/85 Medium and Long actions - Recknagel Picatinny Rail 57050-0114.
Always check the measurements on your rifle before ordering.

Please Note that some Sako 75 actions have quite high tolerances and for that reason it is possible that the mount will be tight on the cone. We have to make it this way as a loose mount will not hold zero. Some hand fitting may be required. This is easily done and we can advise on the correct method should you experience this problem. If you are not experienced or competent in this work, please contact us or send it back for a full refund. If you attempt to make alterations to this rail, please be aware that once the mount has been altered, we are unable to provide a refund or accept a return.

For more information about scope mounts and problems mounting a scope, contact Alan Rhone Ltd on 01978 66 00 01.
3 x Krieghoff Brass Front Sight Bead3 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x ERATAC Bubble Level [T0940-0002]2 x Krieghoff Navy Canvas Gun Slip1 x Schmierfix Grease by Liqui Moly2 x Krieghoff Factory Hanger Pin1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Jones Original Pad Adjuster2 x K-80 Standard Trigger - Black Titanium2 x K-80 Standard Trigger - Gold Titanium3 x Krieghoff Spares Kit2 x K-80 Standard Trigger - Titanium1 x K-80 Standard Trigger - Steel1 x K-80 Standard Trigger - Gold Plated2 x K-80 Forward Position Trigger - Titanium2 x Jones Gun Nut Kit2 x Black Barrel Case (83cm Internal)2 x K-80 Forward Position Trigger - Black Titanium2 x Jones Thru-the-Pad Adjuster1 x K-80 Forward Position Trigger - Gold Plated2 x K-80 Forward Position Trigger - Gold Titanium1 x WalkStool Comfort 65 (65cm/26in)1 x Walkstool Steady1 x WalkStool Spare Leg Joints2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Anschütz Biathlon Harness4 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Schultz & Larsen Professional Bipod by Spartan2 x Krieghoff HIVIZ Pro Sights2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Bauer Outdoor 10x25 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)2 x K-80 Barrel Weight Balance System2 x K-80 Stock Weight for Balance System2 x Krieghoff Stock Removal Wrench1 x Krieghoff Pro Choke Box1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Krieghoff Trigger Screw2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Shell Bag1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Krieghoff Choke Multi Wrench1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff C-Clips (E-Clips)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff Safety Catch Locking Screw Wrench1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff .410g Choke Wrench1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Krieghoff 12b Choke Wrench1 x Teague Precision Choke Key1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel SOB3D Silencer (Standard Thread)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)
Manufacturers
Useful Information