Starkie Blue (A.K.A Smurf Poo)

£4.99
20% VAT incl.


  • Model:STARKIE-B
Starkie Blue Metal Polishing Compound.

Used in conjunction with a leather strop to achieve that razor edge on your knife. Any suitable piece of leather can be used as a strop. The paste should be put on the rough side of the leather rather than on the smooth face.

How it Works:
1. Vigrously rub this polishing compound stick onto your leather until you have an even, but thin, layer on the leather. In cold weather the paste will be hard but vigorous rubbing on the leather will still deposit a thin grey layer. Storing the paste in a warm environment makes it a little easier to rub onto the leather.

2. Once you begin stropping you will see the blue surface slowly turning black as it removes a microscopically thin layer of metal leaving you with a razor sharp edge.

Leather is mildly abrasive in itself, this compound speeds up the process of stropping considerably.

For those who do not know, stropping is the reverse of sharpening. You draw the blade across the leather in the opposite direction to sharpening. Keep the blade angle the same as when sharpening but draw the blade across the leather backwards. When sharpening you draw the knife across the sharpener as if trying to take a thin slice off the top of the stone, but when stropping you draw the blade backwards at the same angle. Do this on alternative sides, always keeping the same angle, and you will develop a razor edge surprisingly quickly.

Weight: 65 g (Approx.)
Size: 95 x 30 x 20 mm
1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Krieghoff HIVIZ Pro Sights1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Jones Gun Nut Kit1 x Jones Original Pad Adjuster1 x Jones Thru-the-Pad Adjuster1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x VFG Adaptor fits Pro Shot Cleaning Rods (8-32 Thread)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Adaptor for VFG Rods Brass1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Adaptor fits Tetra Cleaning Rods (8-32 Thread)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Schmierfix Grease by Liqui Moly1 x Schultz & Larsen Take Down Rifle Case
Manufacturers
Useful Information