Kick-Eez Trap (401)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ401
This pad has a concave face and was designed especially for "Fixed Position" trapshooting.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black
Measurements (All 401 Series Pad):
Width - 52mm / 2.04"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad:
401-6 - 19mm (0.75") Thick / Weight: 158 g
401-8 - 23mm (0.94") Thick / Weight: 197 g
401-10 - 29.5mm (1.16") Thick / Weight: 235 g
(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 301 - All Purpose
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: A. Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

2 x Recknagel Barrel Banded Front Ramp [12530-....]4 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]4 x Krieghoff Safety Catch Locking Screw Wrench2 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff Shooter's Towel - Green1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)3 x Anschütz Biathlon Harness4 x Recknagel Super Express 2 Leaf Sight [15400-3036]5 x Schultz & Larsen Professional Bipod by Spartan1 x Ex-Demo K-80 Steel 12b Hanger #85 x Recknagel Folding Front Sight Bead Ivory [11240-3565]3 x Schmierfix Grease by Liqui Moly1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]2 x Ex-Display Bear Grylls Ultimate Pack with Multi-Tool2 x K-80 Barrel Weight Balance System2 x Krieghoff "K" Beanie - Royal3 x Recknagel Standard Banded Swivel Ring [22620-....]2 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x Krieghoff "K" Bobble Beanie - Green1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff "K" Beanie - Oatmeal1 x Krieghoff "K" Bobble Beanie - Royal Blue2 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x AimZonic Plus Camo Sound Moderator1 x ERATAC Bubble Level [T0940-0002]5 x Krieghoff "K" Denim Cap - Grey4 x Jones Original Pad Adjuster2 x EX Demo - Gerber Steady Tool (Phone Tripod)2 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Krieghoff "K" Mesh Cap - Grey3 x MSA Sordin - Hygiene Kit - Foam Seals1 x Clearance Krieghoff Classic Rifle Americase (With Cover)3 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Bauer Outdoor 8x21 Binoculars1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]2 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel SOB02 Silencer (Standard Thread)1 x Chapman Precision Screwdriver Set 8900, 28 Piece (SAE)1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Sling Swivel Loop - 28.5mm, M5 Screw [21415-9020]2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud2 x Ebony & Brass 20 Bore Snap Caps1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]2 x Krieghoff Sight Bead Blanking Screw1 x Chamber Brush 20b1 x Bauer Outdoor 10x25 Binoculars2 x Bauer HD Series 8x25 Binoculars3 x Walkstool Steady1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]2 x Krieghoff Extended Pillars for Adjustable Comb2 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Krieghoff C-Clips (E-Clips)1 x K-80 Standard Trigger - Gold Plated1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)2 x Garant TORX Screwdriver TORX10 (10 x 70)2 x Krieghoff .410g Choke Wrench2 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Gerber GDC Zip Blade2 x Krieghoff 28b Choke Wrench4 x Jones Gun Nut Kit2 x Krieghoff Comb Wrench (T-Handle)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Gerber Gator Combo Replacement Saw2 x Garant TORX Screwdriver TORX15 (15 x 80)2 x Krieghoff "K" Denim Cap - Navy3 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]3 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x Gerber Myth Series Field Sharpener1 x Bauer Power LED L-XL1 Torch1 x D Cell x 2 Camelion Plus Alkaline Batteries2 x HJB 6-24x50 Rifle Scope (Mil-Dot)2 x Silva Dine Duo Kit - Purple/White1 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x K-80 Stock Weight for Balance System1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]2 x Krieghoff Pro Choke Box1 x LED Lenser Intelligent Filter Set with Holster1 x LED Lenser F1 Torch1 x Recknagel Spare Tri-Nut Wrench 00088-00862 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]2 x WalkStool Comfort 65 (65cm/26in)1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x Contessa Picatinny Rail - Winchester 70 Long (20 MOA)1 x Krieghoff Spares Kit1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA) Extended1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]2 x Gerber Paraframe II Fine Edge Knife1 x Recknagel Steel Stock Trap Door2 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Achievement Badge 25 Straight1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Clearance Americase Cordura Case Cover (32x11x3")2 x Gerber Myth Series Fixed Saw2 x K-80 Forward Position Trigger - Gold Plated1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x EX Demo - Gerber Metolius Pocket Folder1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x AimZonic Compact Camo Sound Moderator1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Schultz & Larsen Torx Key for Scope Mounts1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Krieghoff Achievement Badge 100/3001 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Krieghoff Trigger & Selector Locking Wrench1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Jones Thru-the-Pad Adjuster1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Black Barrel Case (83cm Internal)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x WalkStool Set of Spare Red Spring1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)
Manufacturers
Useful Information