Kick-Eez All Purpose Pad (301)

£46.00
20% VAT incl.

Available Options

  • Model:KICKEEZ301
This pad was designed as an "All Purpose" pad to be used in all shooting applications. The new 13mm thickness can also be used on the adjustable and hydraulic plates.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black

Measurements (All 301 Series Pad):
Width - 51mm / 2"
Length - 145mm / 5.7"

Choice of Pad: (Select from the Options at the bottom of the page)

301-5 - 13mm / 0.51" Thick
301-6 - 18mm / 0.71" Thick
301-8 - 23mm / 0.91" Thick
301-10 - 28mm / 1.02" Thick

(Note: Some sizes may be temporarily out of stock and not available)

Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Used Schultz & Larsen Rings 30mm, Med (11mm BH)2 x Krieghoff K80 KTW Pro Choke Wrench2 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Adaptor for VFG Rods (Spare)2 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Bear Grylls Ultimate Pack with Multi-Tool1 x Krieghoff Shooter's Towel - Navy1 x Krieghoff Shooter's Towel - Red2 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Krieghoff Premium ABS Case (K-80/K-20)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Krieghoff Shell Bag1 x Krieghoff Elite Canvas Gun Slip1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Clearance Americase Cordura Case Cover (37x11x3.5")1 x Krieghoff Shooter's Towel - Black1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff Shooter's Towel - Green1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Bear Grylls Paracord Fixed Blade1 x Schmierfix Grease by Liqui Moly1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Pro Choke Box
Manufacturers
Useful Information
Reviews
MSA Sordin - Hygiene Kit - Gel Ear Seals
MSA Sordin - Hygiene Kit - Gel Ear Seals
£26.00
20% VAT incl.

Ordered these on Tuesday, delivered on Wednesday and tried t...