Kick-Eez All Purpose Pad (301)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ301
This pad was designed as an "All Purpose" pad to be used in all shooting applications. The new 13mm thickness can also be used on the adjustable and hydraulic plates.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black

Measurements (All 301 Series Pad):
Width - 51mm / 2"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad: (Select from the Options at the bottom of the page)

301-5 - 13mm (0.51") Thick / Weight: 91 g
301-6 - 18mm (0.71") Thick / Weight: 125 g
301-8 - 23mm (0.91") Thick / Weight: 172 g
301-10 - 28mm (1.02") Thick / Weight: 216 g

(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 401 - Trap
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

2 x Gerber GDC Zip Blade1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)3 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)2 x Schmierfix Grease by Liqui Moly1 x K-80 Stock Weight for Balance System1 x Krieghoff "K" Logo Cap Grey & White3 x Ex-Display Gerber GDC Zip Hex3 x Gerber Basic Fixed Blade Serrated2 x Gerber Myth Series Fixed Saw1 x Krieghoff "K" Beanie - Heather Navy5 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set3 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]2 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)5 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Ex-Demo K-80 Steel 12b Hanger #51 x VFG Pull Through Pocket Set for .22 Upwards3 x Ex-Display Bear Grylls Ultimate Pack with Multi-Tool1 x Black Leather Shell/Cartridge Pouch1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Gerber New Myth Series Pocket Folder1 x WalkStool Comfort 65 (65cm/26in)3 x Black Barrel Case (83cm Internal)1 x Ebony & Brass Cleaning Rod1 x Gerber Paraframe II Fine Edge Knife1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Gerber STL 2.5 Fine Edge2 x Garant TORX Screwdriver TORX10 (10 x 70)1 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x DMT Diafold Magna-Guide Kit1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Gerber Balance Multi-Tool Black1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff Choke Multi Wrench1 x Clearance Krieghoff Classic Rifle Americase (No Cover)2 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]2 x Garant TORX Screwdriver TORX15 (15 x 80)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Gerber New Myth Series Fixed Blade Pro (Fine Edge)1 x Starkie Blue (A.K.A Smurf Poo)1 x VFG Adaptor for VFG Rods Brass1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]2 x Gerber GDC Hook Knife1 x Gerber New Myth Series Fixed Blade Pro (Gut Hook)2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x ERATAC M-Lok Picatinny Rail, 5 Slots [T5905-0008]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x ERATAC M-Lok Adaptor for HK Hook [T5500-0000]1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel 25.4mm/1 inch Ring Components - 5mm BH1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail3 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel 30mm Ring Components - 5mm BH2 x AAA x 4 Camelion Plus Alkaline Batteries1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Recknagel Adaptor for Thermal and Night Vision Devices - 48mm1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.35mm [T0541-13551 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Holex TORX Screwdriver set of 7 [00062-5057]1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x LED Lenser F1 Torch2 x Gerber Descent - Folding Knife1 x Silva Dine Duo Kit - Turquoise/White1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Contessa Spare Ring-to-Base Screws1 x Krieghoff 2011 Badge (Collectors Badge)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Ex-Demo K-80 Steel 12b Hanger #62 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Clearance Americase Cordura Case Cover (34.5x9x4.5")3 x Krieghoff Pro Choke Box1 x Krieghoff Brass Mid Sight Bead1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (012)1 x Gerber Bullrush Tactical Multi-Tool1 x Clearance Krieghoff Classic Rifle Americase (With Cover)2 x LED Lenser Car Charger1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Bear Grylls Pocket Tool1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)3 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)3 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)5 x Recknagel Barrel Banded Front Ramp [12530-....]2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x VFG Adaptor for Parker Hale English Rods (over 7mm)3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Krieghoff "K" Denim Cap - Grey2 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]2 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Silva ex10 Distance Pedometer - White2 x AA x 4 Camelion Plus Alkaline Batteries1 x Bear Grylls Basic Survival Kit by Gerber2 x Krieghoff "K" Mesh Cap - Grey3 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]2 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]2 x AimZonic Plus Camo Sound Moderator2 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]2 x Krieghoff "K" Mesh Cap - Navy2 x Krieghoff Fine Leather Gun Case (K-80 Parcours)2 x Recknagel Picatinny Rail Sako Short, Alu [..0014]2 x K-80 Barrel Weight Balance System2 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Ex-Demo K-80 Steel 12b Hanger #81 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Krieghoff Factory Hanger Pin2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel 18mm Banded Sling Swivel - Euro Style [22600-1180]2 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x Recknagel SOB3D Silencer (ERA LOC)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x VFG Adaptor fits Tetra Cleaning Rods (8-32 Thread)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)
Manufacturers
Useful Information