Kick-Eez All Purpose Pad (301)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ301
This pad was designed as an "All Purpose" pad to be used in all shooting applications. The new 13mm thickness can also be used on the adjustable and hydraulic plates.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black

Measurements (All 301 Series Pad):
Width - 51mm / 2"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad: (Select from the Options at the bottom of the page)

301-5 - 13mm (0.51") Thick / Weight: 91 g
301-6 - 18mm (0.71") Thick / Weight: 125 g
301-8 - 23mm (0.91") Thick / Weight: 172 g
301-10 - 28mm (1.02") Thick / Weight: 216 g

(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 401 - Trap
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel SOB3D Silencer (Standard Thread)2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)2 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)2 x Schultz & Larsen Take Down Rifle Case2 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)2 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Krieghoff 2011 Badge (Collectors Badge)1 x Krieghoff Factory Hanger Pin2 x CR2032 Camelion Lithium Battery1 x Recknagel Screw M3.5 x 3.8 x 5 [..0380]2 x Krieghoff Achievement Badge 25 Straight2 x AAA x 4 Camelion Plus Alkaline Batteries2 x Hi Viz - How to Become a Better Shooter1 x Bauer ED 10x42 Binoculars1 x Bauer HD 8.5x50 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff 2013 Badge (Collectors Badge)3 x Badge - Cob Bronze1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Bauer ED 8x32 Binoculars1 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)2 x AA x 4 Camelion Plus Alkaline Batteries1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)3 x Anschütz Biathlon Harness1 x Krieghoff 2012 Badge (Collector's Badge)1 x Bauer HD 8x42 Binoculars1 x Bauer HD 8x56 Binoculars1 x Krieghoff Achievement Badge 200 Straight (Black)1 x Krieghoff C-Clips (E-Clips)1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Bauer ED 8x42 Binoculars1 x Bauer ED 8x50 Binoculars1 x Bauer - One Piece Railmount 25.4mm (11mm High)2 x Krieghoff Achievement Badge 200 Straight (Blue)2 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Black Leather Shell/Cartridge Pouch1 x Starkie Blue (A.K.A Smurf Poo)1 x Chamber Brush 20b1 x Ebony & Brass Cleaning Rod1 x Krieghoff Stock Removal Wrench1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff Comb Wrench (T-Handle)1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Schmierfix Grease by Liqui Moly1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Jones Thru-the-Pad Adjuster1 x Krieghoff "K" Mesh Cap - Grey1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Bauer Outdoor 8x21 Binoculars1 x Krieghoff 2015 Badge (Collectors Badge)1 x K-80 Standard Trigger - Titanium1 x Jones Gun Nut Kit2 x AimZonic Plus Camo Sound Moderator1 x Krieghoff "K" Denim Cap - Navy1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x K-80 Forward Position Trigger - Titanium1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)2 x Clearance Americase Cordura Case Cover (32x11x3")1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Custom Rifles of Great Britain by Bruce Potts1 x Krieghoff Achievement Badge 100/3002 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Krieghoff 2009 Badge (Collectors Badge)2 x Black Barrel Case (83cm Internal)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Krieghoff "K" Mesh Cap - Black1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Bauer Outdoor 10x25 Binoculars1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Krieghoff Navy Canvas Gun Slip1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x VFG Adaptor for VFG Rods (Spare)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff Shell Bag1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended
Manufacturers
Useful Information