Kick-Eez All Purpose Pad (301)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ301
This pad was designed as an "All Purpose" pad to be used in all shooting applications. The new 13mm thickness can also be used on the adjustable and hydraulic plates.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black

Measurements (All 301 Series Pad):
Width - 51mm / 2"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad: (Select from the Options at the bottom of the page)

301-5 - 13mm / 0.51" Thick
301-6 - 18mm / 0.71" Thick
301-8 - 23mm / 0.91" Thick
301-10 - 28mm / 1.02" Thick

(Note: Some sizes may be temporarily out of stock and not available)

Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

Krieghoff "K Logo" Polo Shirt - Burgundy (S / XL)
Krieghoff "K Logo" Polo Shirt - Burgundy (S / XL)
£25.00
20% VAT incl.
now £12.00
20% VAT incl.
Jones Original Pad Adjuster
Jones Original Pad Adjuster
£95.00
20% VAT incl.
2 x Krieghoff Steel Middle Hanger (For Parcours)2 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)2 x ERATAC Bubble Level [T0940-0002]2 x Contessa Picatinny Rail - Sako S20 (20 MOA)3 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff "K" Logo Cap Red & White1 x Krieghoff "K" Bobble Beanie - Black1 x Krieghoff K-80 Sport Logo Cap Grey & White1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Krieghoff "K" Logo Cap Grey & White1 x Krieghoff "K" Bobble Beanie - Burgundy1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Contessa Picatinny Rail - H&K SLB 2000 (0 MOA)4 x Krieghoff Premium ABS Case (K-80/K-20)3 x Krieghoff Elite Canvas Gun Slip4 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Krieghoff "K" Bobble Beanie - Green2 x Krieghoff "K" Bobble Beanie - Royal Blue1 x Clearance Americase Cordura Case Cover (32x11x3")2 x Krieghoff "K" Bobble Beanie - Heather Grey1 x Krieghoff "K" Bobble Beanie - Navy5 x Black Barrel Case (83cm Internal)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x AimZonic Plus Camo Sound Moderator1 x VFG Adaptor for VFG Rods (Spare)3 x AimZonic Compact Camo Sound Moderator1 x Gerber Dime Multi-Tool (Lime)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Used Schultz & Larsen Rings 30mm, Med (11mm BH)1 x Recknagel Steel Stock Trap Door1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Contessa Picatinny Rail - Anschutz 64 (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54 (20 MOA)2 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Krieghoff Pro Choke Box1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Krieghoff "K" Denim Cap - Navy1 x Ex-Display Silva Ranger Compass1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Clearance Americase Cordura Case Cover (37x12x4.5")2 x Jones Gun Nut Kit1 x Clearance Americase Cordura Case Cover (34.5x9x4.5")1 x Grain Sealer by Trade Secret (50ml)1 x Recknagel Barrel Banded Front Ramp [12530-....]3 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended2 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Gerber Descent - Folding Knife1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)2 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (012)2 x Ex-Display Gerber GDC Zip Hex1 x Teague Precision Choke Key2 x Jones Original Pad Adjuster1 x Bauer ED 10x42 Binoculars1 x Gerber Myth Series Fixed Saw1 x Garant TORX Screwdriver TORX15 (15 x 80)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Krieghoff Shell Bag1 x Ebony & Brass 20 Bore Snap Caps1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Garant TORX Screwdriver TORX10 (10 x 70)1 x Bauer ED 8x42 Binoculars1 x Krieghoff Achievement Badge 100/3001 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x ERATAC ACI Bubble Level [T0940-0000]1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Badge - Cob Bronze1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Contessa Picatinny Rail - Sako 75/85 Long (0 MOA) Adjustable1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x K-80 Barrel Weight Balance System1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]2 x Gerber Gator Combo Replacement Saw2 x Recknagel Picatinny Rail Steyr-Mannlicher SL, 20 MOA, Alu [2488]2 x Recknagel Picatinny Rail Steyr-Mannlicher SL 0 MOA, Alu [.0488]4 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Used Recknagel Picatinny Rail Sako Short, Alu, 20 MOA [..2014]1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff "K" Mesh Cap - Grey1 x Anschütz Biathlon Harness1 x Krieghoff "K" Mesh Cap - Navy1 x Krieghoff "K" Denim Cap - Grey1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set
Manufacturers
Useful Information