Kick-Eez All Purpose Pad (301)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ301
This pad was designed as an "All Purpose" pad to be used in all shooting applications. The new 13mm thickness can also be used on the adjustable and hydraulic plates.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black

Measurements (All 301 Series Pad):
Width - 51mm / 2"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad: (Select from the Options at the bottom of the page)

301-5 - 13mm / 0.51" Thick
301-6 - 18mm / 0.71" Thick
301-8 - 23mm / 0.91" Thick
301-10 - 28mm / 1.02" Thick

(Note: Some sizes may be temporarily out of stock and not available)

Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

Krieghoff "K Logo" Polo Shirt - Burgundy (S / XL)
Krieghoff "K Logo" Polo Shirt - Burgundy (S / XL)
£25.00
20% VAT incl.
now £12.00
20% VAT incl.
Jones Original Pad Adjuster
Jones Original Pad Adjuster
£95.00
20% VAT incl.
3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Schultz & Larsen Professional Bipod by Spartan2 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]2 x Schultz & Larsen T-Handle Wrench (Torx 20)3 x Krieghoff Pro Choke Box1 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x Silva Commute Bike Light - Green4 x Silva Map Measurer (Mechanical)2 x Silva Commute Bike Light - Pink2 x LED Lenser F1 Torch3 x Bauer - One Piece Railmount 25.4mm (11mm High)5 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)3 x Silva Dine Duo Kit - Purple/White1 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Anschutz 54 (0 MOA)4 x Ex-Display Silva Ranger Compass2 x Krieghoff K80 Speed Wrench for KTW Chokes3 x Silva Pavé Sport Bike Light White/Black1 x Bauer HD Series 8x25 Binoculars1 x K-80 Barrel Weight Balance System1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 500)1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x LED Lenser Car Charger2 x LED Lenser Intelligent Filter Set with Holster3 x Silva Dine Duo Kit - Turquoise/White3 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended2 x Silva ex10 Distance Pedometer - White2 x Recknagel Steel Stock Trap Door2 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff "K" Bobble Beanie - Black1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)5 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Gerber Myth Series Field Sharpener1 x Bauer Outdoor 8x21 Binoculars1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Krieghoff Sight Bead Blanking Screw1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Bear Grylls Ultimate Pack with Multi-Tool1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Jones Original Pad Adjuster1 x Gerber GDC Hook Knife1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x Gerber Descent - Folding Knife1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Used Precision Fit Stock Spare Grip for Blaser F3, Left-Hand (01)1 x Contessa Lightweight Alloy Picatinny Mount for Red Dot Sights1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Gerber Basic Fixed Blade Serrated1 x Gerber Dime Multi-Tool (Lime)1 x Bear Grylls Pocket Tool1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)2 x Chapman Precision Screwdriver Set 8900, 28 Piece (SAE)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff "K" Mesh Cap - Navy1 x AimZonic Plus Camo Sound Moderator1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Krieghoff Brass Mid Sight Bead1 x Recknagel 19mm Dovetail Ring Mounts 30mm2 x Ex-Display Gerber GDC Zip Hex1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Gerber Metolius Pocket Folder1 x Used Precision Fit Stock Spare Grip for Krieghoff K-80, Right-Hand (02)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Clearance Americase Cordura Case Cover (37x12x4.5")2 x Jones Thru-the-Pad Adjuster1 x Ebony & Brass 20 Bore Snap Caps1 x Recknagel Bases for 16mm Dovetail - Steyr Classic [48005-0088]1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Walkstool Steady1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Chamber Brush 20b3 x Used Contessa Picatinny Rings, 30mm, 8mm High1 x Bauer ED 10x42 Binoculars1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Used Recknagel QD Rings for Picatinny - 34mm, 12.0mm BH [57534-1201]1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x Briley 20b Speed Wrench - For Krieghoff2 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Picatinny Rail Steyr-Mannlicher SL 0 MOA, Alu [.0488]2 x Recknagel Standard Banded Swivel Ring [22620-....]2 x Bear Grylls Ultra Compact Knife2 x Schmierfix Grease by Liqui Moly1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Bear Grylls Compact Multi-Tool by Gerber1 x Bear Grylls Basic Survival Kit by Gerber1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud
Manufacturers
Useful Information