Kick-Eez All Purpose Pad (301)

£54.00
20% VAT incl.

Available Options

  • Model:KICKEEZ301
This pad was designed as an "All Purpose" pad to be used in all shooting applications. The new 13mm thickness can also be used on the adjustable and hydraulic plates.

The Kick-Eez Pads are produced as Oversized and will need grinding to fit to your stock. Please contact us before ordering if you have any issue regarding the fitting. We do provide a fitting service, which would involve sending us your stock or booking an appointment to have the work done.
Our number is 01978 66 00 01.

Colour: Black

Measurements (All 301 Series Pad):
Width - 51mm / 2"
Length - 145mm / 5.7"
Hole Spacing - 80mm / 3 1/8"

Choice of Pad: (Select from the Options at the bottom of the page)

301-5 - 13mm (0.51") Thick / Weight: 91 g
301-6 - 18mm (0.71") Thick / Weight: 125 g
301-8 - 23mm (0.91") Thick / Weight: 172 g
301-10 - 28mm (1.02") Thick / Weight: 216 g

(Note: Some sizes may be temporarily out of stock and not available)

Other Kick-Eez Pads Available:
- Kick-Eez 401 - Trap
- Kick-Eez 403 - Modified Trap
- Kick-Eez DA 301 - Dual Action All Purpose


Installation Instructions:

Step 1
Position the pad on the butt of your stock and determine whether or not you can use the existing screw holes. If the holes match, proceed to step 2. If the holes do not match on your wood stock, then do the following: position the pad on the butt of the stock and mark the new screw holes on the gun stock butt. If the new holes are going to interfere with the old holes, then you must plug the old holes of the gun stock butt. The best way to do this is to drill out the old holes with a 1/4" drill to a depth of one inch and then cut a 1/4" dowel rod 7/8" in length and drive it into the hole. Reposition the pad on the stock, mark the location of your new screw holes, drill a 1/8" hole to a depth of one inch and screw the pad to the stock.

Step 2
While the pad is still on the stock, scribe a line on the pad plate. Remove pad from stock and position pad on a grinding jig and sand to the line you have scribed on the plate. If you do not have a jig you can "free hand" sand the pad.

Step 3
After grinding to the proper fit, radius (round) the heel, toe and sides of the pad to remove any square corners. This will make the gun easier to mount to the shoulder, give it a more attractive appearance, and prolong its life.

Step 4
Screw pad on stock. For best results: Pads with 1/8 inch holes apply a lubricant like Vaseline to the face of the pad around the mounting holes. This will help prevent marring the pad during installation of the screws. Wipe the pad clean after installation.

Step 5
Placing recoil pads on synthetic stocks may require professional installation by your gunsmith




You might also like...

1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Schultz & Larsen Professional Bipod by Spartan1 x EX Demo - Gerber Metolius Pocket Folder1 x Krieghoff Shooter's Towel - Black3 x Jones Original Pad Adjuster2 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Krieghoff Trigger Screw2 x Krieghoff Spares Kit2 x Schultz & Larsen Take Down Rifle Case1 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Krieghoff Navy Canvas Gun Slip1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)2 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Contessa Picatinny Rail - Ruger American (0 MOA)2 x Krieghoff Achievement Badge 200 Straight (Black)2 x AA x 4 Camelion Plus Alkaline Batteries2 x Krieghoff Achievement Badge 25 Straight1 x AAA x 4 Camelion Plus Alkaline Batteries1 x K-80 Standard Trigger - Titanium1 x Chamber Brush 20b1 x Black Leather Shell/Cartridge Pouch1 x Anschütz Biathlon Harness1 x Schmierfix Grease by Liqui Moly1 x Bauer HD Series 8x25 Binoculars1 x Bear Grylls Scout Essentials Kit3 x Krieghoff Factory Hanger Pin1 x K-80 Forward Position Trigger - Titanium1 x Jones Gun Nut Kit1 x Starkie Blue (A.K.A Smurf Poo)1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff C-Clips (E-Clips)2 x CR2032 Camelion Lithium Battery1 x Krieghoff Achievement Badge 200 Straight (Blue)1 x Ebony & Brass 20 Bore Snap Caps1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff 2013 Badge (Collectors Badge)1 x Jones Thru-the-Pad Adjuster1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Krieghoff Stock Removal Wrench1 x Hi Viz - How to Become a Better Shooter1 x Bauer ED 8x50 Binoculars1 x Bear Grylls Basic Survival Kit by Gerber1 x Krieghoff 2012 Badge (Collector's Badge)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x AimZonic Plus Camo Sound Moderator1 x K-80 Stock Weight for Balance System1 x VFG Adaptor for Parker Hale English Rods (over 7mm)3 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Recknagel Steel Stock Trap Door1 x VFG Adaptor for VFG Rods (Spare)
Manufacturers
Useful Information