Krieghoff HIVIZ Pro Sights

£48.00
20% VAT incl.


  • Model:HIVIZ-PRO
The famous HIVIZ sights with an optimized base from Krieghoff for the Krieghoff K-80 shotguns with Narrow Taper Flat 10-6mm Ribs.
The Comp sight sets the standard in sight performance for both competition and recreational use.

The original Krieghoff base prevents the HIVIZ sight from moving even with just one screw mounted to the rib! Use the original thread of the original front sight of the Krieghoff rib - no drilling - therefore the original front sight is an easy & fast exchange to the new Krieghoff HIVIZ Pro sight.

This competition shotgun sight includes eight LitePipes, in red, green and white, with four viewing end diameters stored in carrying case with key. It will come with an original Krieghoff base and screw.

Please Note - One screw for all K-80 Barrels 10-6mm Narrow Taper Flat (version built 2014 or later ). Does not fit Parcours version.
Also, this is not intended for 12-8mm Taper Flat Ribs, so please check your barrels before purchasing.
A different product is required for barrels built before 2014 and for Parcours barrels. This does require drilling a second hole into the rib for fitting

Also see:
- Krieghoff Front Sight (Small Size)
- Krieghoff Front Sight (Standard Size)
- Krieghoff Mid Bead Blanking Screw


We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

Krieghoff 12b Choke Wrench
Krieghoff 12b Choke Wrench
£7.50
20% VAT incl.
Schmierfix Grease by Liqui Moly
Schmierfix Grease by Liqui Moly
£6.80
20% VAT incl.
Krieghoff Factory Hanger Pin
Krieghoff Factory Hanger Pin
£1.00
20% VAT incl.
1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA) Extended1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Brass Front Sight Bead1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Quick Release Mount for Zeiss Rail1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x VFG Barrel Cleaning Felts for .45 (Box of 30)
Manufacturers
Useful Information