VFG Barrel Cleaning Felts for .44 (Box of 250)

£19.95
20% VAT incl.


  • Model:331975
VFG Barrel Cleaning Felts for .44 Calibre
Code: 331975


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .44 MAG calibres.

The .44 felts are recommended for the following calibres: .44 Mag
See which Felts suit your Calibre >>>

Supplied as small box containing: 250 felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

2 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)2 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x VFG Pull Through Pocket Set for .22 Upwards2 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Jones Original Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Bauer Outdoor 10x25 Binoculars1 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Bauer HD Series 8x25 Binoculars1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Jones Thru-the-Pad Adjuster1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff1 x Schmierfix Grease by Liqui Moly1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Walkstool Steady1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x WalkStool Spare Leg Joints1 x Contessa Browning BAR Euro Rail for Quick Release Mount
Manufacturers
Useful Information