VFG Barrel Cleaning Felts for .44 (Box of 250)

£19.95
20% VAT incl.


  • Model:331975
VFG Barrel Cleaning Felts for .44 Calibre
Code: 331975


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .44 MAG calibres.

The .44 felts are recommended for the following calibres: .44 Mag
See which Felts suit your Calibre >>>

Supplied as small box containing: 250 felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)4 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH2 x Walkstool Steady2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Krieghoff Brass Mid Sight Bead1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]2 x Schmierfix Grease by Liqui Moly1 x Krieghoff HIVIZ Pro Sights1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (Standard Thread)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel SOB3D Silencer (ERA LOC)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel Picatinny Rail Sauer 202 Std, Steel [..0080]1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.6mm) [20240-0022]1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff 12b Choke Wrench1 x Krieghoff Pro Choke Box1 x ERATAC M-Lok for QD Sling Swivel [T5510-0000]1 x ERATAC M-Lok Adaptor for HK Hook [T5500-0000]1 x WalkStool Set of Spare Red Spring1 x WalkStool Spare Leg Joints1 x ERATAC M-Lok Picatinny Rail, 7 Slots [T5907-0008]1 x ERATAC M-Lok Picatinny Rail, 9 Slots [T5909-0008]1 x Krieghoff .410g Choke Wrench1 x Teague Precision Choke Key1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]2 x Briley 20b Speed Wrench - For Krieghoff2 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x ERATAC M-Lok Adaptor for Harris Bipod [T5390-0005]1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff 28b Choke Wrench1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x ERATAC M-Lok Picatinny Rail, 3 Slots [T5903-0008]1 x Gerber Metolius Pocket Folder1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC M-Lok Picatinny Rail, 5 Slots [T5905-0008]2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x ERATAC Picatinny Riser Mount Block (Nut)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Schultz & Larsen Take Down Rifle Case1 x ERATAC 30mm One Piece Extended Ring Mount (Nut)1 x ERATAC Two-Piece Picatinny Rings (Lever)1 x ERATAC Ultra Lightweight One Piece Ring Mount1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x ERATAC 34mm One Piece Extended Ring Mount (Nut)1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x ERATAC Ultra Lightweight Extended One Piece Ring Mount1 x ERATAC Special Use One Piece Ring Mount for S&B PMII1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x ERATAC Picatinny Riser Mount Block (QD)1 x ERATAC Two-Piece Picatinny Rings (Nut)2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Krieghoff Front Sight Bead (Small)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x ERATAC ACI Bubble Level [T0940-0000]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Schultz & Larsen Torx Key for Scope Mounts1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Quick Release Mount for Burris/Nikon1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)
Manufacturers
Useful Information