Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)

£185.00
20% VAT incl.


  • Model:SL6027
Schultz & Larsen Scope Rings
30mm - X-High (20mm Base Height)


Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 114g
Ring Diameter - 30mm
Base Height (BH) - 20mm
Code Ref: SL6027

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Schultz & Larsen Professional Bipod by Spartan1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff "K" Collectors Badge2 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)2 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff Brass Mid Sight Bead1 x Briley 20b Speed Wrench - For Krieghoff2 x Jones Gun Nut Kit1 x Krieghoff Shooter's Towel - Black2 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Front Sight Bead (Small)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 500)4 x Krieghoff C-Clips (E-Clips)1 x Bauer Outdoor 8x21 Binoculars1 x Bauer Outdoor 10x25 Binoculars1 x WalkStool Spare Plastic Feet2 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail3 x Bauer ED 8x42 Binoculars1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x Used Sako P94S, Wooden Stock (.22 LR)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Bauer - One Piece Railmount 25.4mm (11mm High)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Bauer HD Series 8x25 Binoculars1 x Black Leather Shell/Cartridge Pouch2 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Bauer ED 8x50 Binoculars1 x Krieghoff 2013 Badge (Collectors Badge)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Ebony & Brass Cleaning Rod1 x Krieghoff 2012 Badge (Collector's Badge)1 x Bauer ED 10x42 Binoculars1 x Recknagel SOB3D Silencer (ERA LOC)1 x Krieghoff K-Diamond Beanie - Burgundy1 x WalkStool Spare Leg Joints2 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Bauer HD 8x42 Binoculars1 x ERATAC 30mm One Piece Extended Ring Mount (Nut)3 x Bauer HD 8x56 Binoculars1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (11)1 x VFG Adaptor fits Pro Shot Cleaning Rods (8-32 Thread)2 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x WalkStool Set of Spare Red Spring1 x Contessa Quick Release Mount for Zeiss Rail1 x Winchester 3" Folding Knife2 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Recknagel Barrel Banded Front Ramp [12530-....]2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)2 x K-80 Forward Position Trigger - Titanium1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Recknagel SOB3D Silencer (Standard Thread)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Recknagel Sling Swivel Nut Screw (ø¸ 3.0mm) [20230-0022]1 x Recknagel SECURA Safety for Remington 700 [30170-1200]2 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor2 x Walkstool Steady1 x Bauer ED 8x32 Binoculars1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x K-80 Standard Trigger - Black Titanium1 x ERATAC Special Use One Piece Ring Mount for S&B PMII1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x ERATAC Ultra Lightweight Extended One Piece Ring Mount1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff K-Diamond Beanie - Navy1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (05)1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA) Extended1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Adaptor fits Tetra Cleaning Rods (8-32 Thread)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (12)1 x K-80 Forward Position Trigger - Gold Titanium1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Pro Choke Box1 x Krieghoff Factory Hanger Pin
Manufacturers
Useful Information