Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x Krieghoff Trigger Screw2 x Schultz & Larsen Take Down Rifle Case2 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)2 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Contessa Picatinny Rail - Ruger American (0 MOA)2 x Krieghoff Factory Hanger Pin2 x CR2032 Camelion Lithium Battery1 x Recknagel Screw M3.5 x 3.8 x 5 [..0380]2 x AAA x 4 Camelion Plus Alkaline Batteries2 x Hi Viz - How to Become a Better Shooter1 x Bauer ED 10x42 Binoculars1 x Bauer HD 8.5x50 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x Krieghoff 2013 Badge (Collectors Badge)3 x Badge - Cob Bronze1 x Krieghoff K-80 Badge "K-80 Sport" Logo2 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)2 x AA x 4 Camelion Plus Alkaline Batteries1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Krieghoff 2012 Badge (Collector's Badge)1 x Bauer HD 8x42 Binoculars1 x Bauer HD 8x56 Binoculars1 x Krieghoff Achievement Badge 200 Straight (Black)1 x Krieghoff C-Clips (E-Clips)1 x Bauer ED 8x42 Binoculars1 x Bauer ED 8x50 Binoculars1 x Bauer - One Piece Railmount 25.4mm (11mm High)2 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Black Leather Shell/Cartridge Pouch1 x Starkie Blue (A.K.A Smurf Poo)1 x Ebony & Brass Cleaning Rod1 x Krieghoff Stock Removal Wrench1 x Ebony & Brass 20 Bore Snap Caps3 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Krieghoff "K" Mesh Cap - Grey1 x Bauer Outdoor 8x21 Binoculars1 x Jones Gun Nut Kit3 x AimZonic Plus Camo Sound Moderator1 x Krieghoff "K" Denim Cap - Navy2 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x K-80 Forward Position Trigger - Titanium1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Picatinny Rail - Bergara B14 Short (20 MOA)1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope3 x Krieghoff Achievement Badge 100/3003 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Krieghoff 2009 Badge (Collectors Badge)2 x Black Barrel Case (83cm Internal)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)2 x Krieghoff "K" Mesh Cap - Black1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Bauer Outdoor 10x25 Binoculars1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)2 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Krieghoff Navy Canvas Gun Slip2 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]2 x Krieghoff K80 Speed Wrench for KTW Chokes2 x VFG Adaptor for VFG Rods (Spare)2 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]2 x Krieghoff Shell Bag1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff Pro Choke Box1 x Krieghoff K-Diamond Beanie - Black3 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Krieghoff 12b Choke Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Krieghoff "K" Logo Cap Black & White1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8335]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set3 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Krieghoff HIVIZ Pro Sights1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Krieghoff Woven Fabric Patch1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x K-80 Barrel Weight Balance System1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)
Manufacturers
Useful Information