Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

3 x Schultz & Larsen Picatinny Rail for Legacy (20 MOA)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x Schultz & Larsen Picatinny Rail for Classic DL (0 MOA)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Krieghoff HIVIZ Pro Sights3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x ERATAC 34mm Ring with UNI-Interface [03680-5734]3 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Alu1 x Schultz & Larsen Picatinny Rail for Ambassador (20 MOA)3 x Schultz & Larsen Picatinny Rail for Tikka T3 / T3X (20 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Schultz & Larsen Picatinny Rail for Victory (20 MOA)3 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)3 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)3 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Steel4 x Recknagel Weaver Bases - Schultz & Larsen [57080-3093]1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Schultz & Larsen Picatinny Rings 30mm, 7mm BH, Steel2 x Parker Hale Thread to 8-32 Thread Converter1 x Schultz & Larsen Weaver Rings 30mm, 4mm BH, Steel4 x Schultz & Larsen Picatinny Rail for Legacy (0 MOA)2 x Schultz & Larsen Weaver Rings 30mm, 7mm BH, Steel1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x AimZonic Compact Camo Sound Moderator1 x AimZonic Plus Camo Sound Moderator2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable3 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Trigger Screw1 x Krieghoff Pro Choke Box1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)2 x Schultz & Larsen Take Down Rifle Case1 x Krieghoff Sight Bead Blanking Screw2 x Jones Gun Nut Kit1 x Anschütz Biathlon Harness1 x Jones Thru-the-Pad Adjuster3 x Schmierfix Grease by Liqui Moly1 x Jones Original Pad Adjuster1 x Briley 20b Speed Wrench - For Krieghoff1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Over Barrel)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Schultz & Larsen Scope Rings 30mm, X-High (20mm BH)2 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Bauer Outdoor 10x25 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Comb Wrench (T-Handle)1 x Custom Rifles of Great Britain by Bruce Potts1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Walkstool Steady1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail2 x WalkStool Comfort 65 (65cm/26in)2 x Black Barrel Case (83cm Internal)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x WalkStool Set of Spare Red Spring1 x Starkie Blue (A.K.A Smurf Poo)1 x WalkStool Spare Leg Joints1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Ebony & Brass 20 Bore Snap Caps1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Black Leather Shell/Cartridge Pouch1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Recknagel SECURA Sling Swivel Magnum 25.4mm [22011-9500]1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Recknagel SECURA Sling Swivel - 20mm Wide - 8mm [22011-1000]1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 8mm [22011-3000]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Schultz & Larsen T-Handle Wrench (Torx 20)2 x Schultz & Larsen Torx Key for Scope Mounts2 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schultz & Larsen Spare Screws for Picatinny Rails1 x Krieghoff Navy Gun Slip1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Krieghoff "K" Denim Cap - Grey1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x Krieghoff K-Diamond Beanie - Grey1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench2 x Recknagel Picatinny Bases - Schultz & Larsen1 x ERATAC ACI Bubble Level [T0940-0000]1 x Krieghoff Front Sight Bead (Standard)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x ERATAC KeyMod Picatinny Rail. 7 Slots [T4907-0010]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x ERATAC KeyMod Adaptor for Harris Bipod Adaptor [T4390-0007]1 x Bauer ED 8x50 Binoculars1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Schultz & Larsen Picatinny Rail for Ambassador (0 MOA)1 x Krieghoff 12b Choke Wrench1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Schultz & Larsen Picatinny Rail for Browning X-Bolt Long (0 MOA)1 x ERATAC M-Lok for QD Sling Swivel [T5510-0000]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Contessa Picatinny Rail - Browning BAR (0 MOA)
Manufacturers
Useful Information