Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount3 x ERATAC 34mm Ring with UNI-Interface [03680-5734]4 x Clearance Americase Cordura Case Cover (32x11x3")1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop - 6mm Stud1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)4 x Bauer Outdoor 10x25 Binoculars4 x Bauer HD Series 8x25 Binoculars1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)2 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Gerber Balance Multi-Tool Black2 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC M-Lok Picatinny Rail, 9 Slots [T5909-0008]1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)4 x Starkie Blue (A.K.A Smurf Poo)1 x Clearance Krieghoff Classic Rifle Americase (No Cover)4 x Black Barrel Case (83cm Internal)1 x Contessa Picatinny Rail - Sako 75/85 Short (10 MOA) Adjustable1 x Bauer Power LED L-XL1 Torch3 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)4 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x ERATAC KeyMod Picatinny Rail. 7 Slots [T4907-0010]1 x ERATAC M-Lok Picatinny Rail, 5 Slots [T5905-0008]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 48mm9 x AimZonic Compact Camo Sound Moderator1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x K-80 Forward Position Trigger - Black Titanium1 x ERATAC Picatinny to Harris Bipod Adaptor, Stud (Nut)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II2 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Krieghoff Ejector Ball and Spring1 x Contessa CZ 550 Euro Rail for Quick Release Mount2 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser2 x Krieghoff Safety Catch Locking Screw Wrench1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (0 MOA)1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x ERATAC KeyMod Adaptor for Harris Bipod Adaptor [T4390-0007]2 x Bauer ED 8x50 Binoculars2 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)2 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa Picatinny Rail - Browning A Bolt 3 Long (0 MOA) Extended1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount2 x ERATAC Two-Piece Picatinny Rings (Nut)2 x ERATAC Picatinny Riser Mount Block (Nut)2 x Krieghoff .410g Choke Wrench2 x Silva Pavé Sport Bike Light White/Black3 x Contessa Spare Blaser Mounting Clamp Parts2 x Bear Grylls Paracord Fixed Blade4 x AAA x 4 Camelion Plus Alkaline Batteries1 x Recknagel Picatinny Rail Mauser 98, Steel [..0010]1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Alu1 x Krieghoff 2012 Badge (Collector's Badge)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x K-80 Standard Trigger - Gold Plated2 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)2 x ERATAC 34mm One Piece Extended Ring Mount (Lever)3 x Black Leather Shell/Cartridge Pouch1 x Recknagel Detachable Sling Swivel 20mm Loop - 6mm Stud2 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable2 x Hi Viz - How to Become a Better Shooter3 x Krieghoff 12b Choke Wrench1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)2 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Bear Grylls Basic Survival Kit by Gerber1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount3 x Walkstool Steady1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable2 x Recknagel Detachable Sling Swivel 25.4mm Loop - 6mm Stud1 x ERATAC Offset Backup Sight Kit for Picatinny, 1.35mm [T0541-13552 x K-80 Forward Position Trigger - Titanium2 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x ERATAC 30mm One Piece Extended Ring Mount (Lever)3 x Schultz & Larsen Professional Bipod by Spartan2 x Teague Precision Choke Key1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA2 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)3 x Krieghoff "K" Logo Cap Navy & White1 x Contessa Picatinny Rail - Sako 75/85 Short - Extended/Adjustable1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x ERATAC KeyMod Picatinny Rail. 9 Slots [T4909-0010]3 x Silva ex10 Distance Pedometer - White1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x ERATAC M-Lok Adaptor for Harris Bipod [T5390-0005]2 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Quick Release Picatinny Rail1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser2 x Krieghoff Front Sight Bead (Small)1 x ERATAC Offset UNI-Interface to UNI-Interface [T0960-0005]2 x Silva Dine Duo Kit - Turquoise/White1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)2 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO2 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x Contessa One Piece QD Extended Picatinny Rail Mount2 x K-80 Standard Trigger - Steel1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts2 x ERATAC KeyMod Picatinny Rail. 5 Slots [T4905-0010]2 x ERATAC Ultra Lightweight One Piece Ring Mount1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Contessa Picatinny Rail - Sako S20 (20 MOA)2 x LED Lenser Car Charger2 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Recknagel Picatinny Bases - Remington 700 (6-48)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail3 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable2 x ERATAC 30mm One Piece Extended Ring Mount (Nut)1 x ERATAC KeyMod Picatinny Rail, 3 Slots [T4903-0010]1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x Recknagel Picatinny Rail Steyr-Mannlicher SL, 20 MOA, Alu [2488]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Gerber GDC Zip Blade1 x Recknagel Picatinny Rail Sako Long, Alu [..0114]2 x VFG Barrel Cleaning Felts for 9mm (Box of 500)3 x Contessa Spare Ring-to-Base Screws1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extend/Adjustable1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0010]1 x Bear Grylls Pocket Tool1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Recknagel Picatinny Rail Sauer 404 / 303, Steel [.003A]1 x Used Sako P94S, Wooden Stock (.22 LR)1 x VFG Complete Set for .1771 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x ERATAC M-Lok Picatinny Rail, 7 Slots [T5907-0008]2 x Silva Commute Bike Light - Green1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)4 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)2 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable2 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x Krieghoff Steel Middle Hanger (For Parcours)1 x Gerber Dime Multi-Tool (Lime)2 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Gerber Basic Fixed Blade Serrated2 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)2 x AimZonic Plus Camo Sound Moderator1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)2 x Silva Commute Bike Light - Pink1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]2 x Recknagel Blank 12mm Eurorail - 150mm2 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Schultz & Larsen T-Handle Wrench (Torx 20)3 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH3 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Silva Map Measurer (Mechanical)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa Quick Release Mount for Swarovski Rail3 x Silva Dine Duo Kit - Purple/White1 x Contessa Winchester 70 L Euro Rail for QR Mount1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA) Extended1 x Recknagel Picatinny Bases - Remington 700 (8-40)2 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x MSA Sordin - Hygiene Kit - Foam Seals1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Lever)1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser2 x Ziegler Quick Release Mount for Blaser - 40mm Rings3 x WalkStool Set of Spare Red Spring1 x Contessa Picatinny Rail - Sako 75/85 Medium (20 MOA) Adjustable1 x VFG Adaptor for VFG Rods (Spare)1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x K-80 Forward Position Trigger - Gold Plated1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (10 MOA)2 x Bauer ED 8x32 Binoculars1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x K-80 Forward Position Trigger - Steel1 x K-80 Standard Trigger - Black Titanium1 x Contessa Picatinny Rail - Remington 700 Short (0 MOA)2 x K-80 Standard Trigger - Titanium1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (10 M1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)2 x WalkStool Comfort 65 (65cm/26in)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Spare Screw for Sako 75/85 Rails1 x Krieghoff "K" Denim Cap - Grey1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff "K" Logo Cap Black & White2 x WalkStool Spare Leg Joints1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Bear Grylls Compact Multi-Tool by Gerber1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Krieghoff Navy Canvas Gun Slip1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Gerber Octane Multi-Tool Red1 x Recknagel SOB3D Silencer (Standard Thread)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Krieghoff Brass Front Sight Bead1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x Krieghoff "K" Mesh Cap - Black1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Krieghoff "K" Denim Cap - Navy1 x Recknagel Picatinny Rail CZ 550 Standard, Alu [..0062]1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff Pro Choke Box1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)
Manufacturers
Useful Information